Flintshire · England
Bath Repair for Pwll-glas homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Pwll-glas. Free, fixed quotes from your photos.
- Repairs from £95
- Scuffs and scratches in the surface
- Chips along the edge of the bath
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- No extra charge for your area
- One-year guarantee on every repair
Read our full price list or resurfacing vs replacement cost guide.
About our bath repair in Pwll-glas
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Whether it’s a failed DIY repair that’s discoloured or lifting and chips on the rim or sides, we can typically put it right, on cast iron enamel, whirlpool & spa baths and acrylic alike.
The work is covered for a year after we finish. If anything is not right, ring us and we will come back.
- Location
- Pwll-glas (CH7)
- County
- Flintshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
We won’t take on work that won’t last, so these are the limits:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
- Let us know which floor the room is on
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
Read more
Work for landlords and builders
For anyone letting property in or around Pwll-glas, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Common questions in Pwll-glas
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Which areas do you work in?
We work UK-wide, and that includes Pwll-glas. Our prices are the same everywhere.
Do you come to Pwll-glas?
Yes. We cover the entire UK and travel to Pwll-glas. Send pictures and we’ll quote, or call 0345 017 0787.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What happens after I send photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What we’re called out for in Pwll-glas
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
Get in touch if you’ve noticed any of these:
- Impact holes in acrylic
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- A chip where the taps sit
What to look for in a quote
- If travel is included in the price
- Who will actually do the work
- Aftercare advice
- Whether they match the colour on site
Also near Pwll-glas
More services for Pwll-glas
Our work in Pwll-glas
Pwll-glas is about 3 miles west of Buckley, in Flintshire. We travel to homes and businesses in Pwll-glas and the surrounding area, so you don’t need to take anything anywhere. Pwll-glas is one of 139 places in Flintshire where we work. We work right across the region, from Pwll-glas to Liverpool (about 19 miles away).
Postcode districts we cover here: CH7. Streets in the area include Church Lane, Clayton Road and Denbigh Road, and we cover them all. Pwll-glas is on the A541 and A5119, which makes it straightforward to reach. Neighbouring places we cover include Maes-y-dre (1 mile north-east), Black Brook (1 mile north-west), Mold (1 mile south-east), Ponterwyl (1 mile south-east) and Pentre Cythrel (1 mile north-east). Further out, we also cover Connah's Quay (5 miles north-east), Buckley (3 miles east), Bwcle (3 miles east), Flint (5 miles north), Saltney (9 miles east) and Holywell (8 miles north).
Local landmarks in Pwll-glas
Around Pwll-glas, we work in homes near Alun School, St Mary's Church and Ysgol Bryn Gwalia C.P., among other places. Pwll-glas’s nearest station is Buckley station, about 4 miles east of the centre. A little further out are Mold Community Hospital (under half a mile south) and Tyddyn Mount (1.4 miles south-east). Green spaces nearby include Padeswood Pool and Bailey Hill.
Prices and what affects them
Repairs from £95. There is no charge for travel to Pwll-glas. The price comes down to:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- How much damage there is
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Where you are, by postcode
- One sharp close-up of the damage
- One picture of the entire bath
- A coin beside the damage so we can judge size
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
