Derbyshire · England
Bath Repair for Pye Bridge homes
Local bath repair for Pye Bridge: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Rust spots around the plughole
Bath repair at your home in Pye Bridge
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our technicians work on acrylic, pressed steel enamel and roll-top & freestanding, and people most frequently call us about cracks in an acrylic bath and snagging damage from a refit.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Pye Bridge (DE55)
- Area hub
- Derbyshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Pye Bridge?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Send us a photo if you notice any of these:
- Cracks in an acrylic bath
- Snagging damage from a refit
- Damage beneath the taps
- Rust spots around the plughole
Comparing quotes
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- What aftercare is recommended
- How soon you can use it again
Nearby places to Pye Bridge
Other services in Pye Bridge
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Our work in Pye Bridge
Pye Bridge is about 3 miles north-east of Ripley, in Derbyshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover 532 places in Derbyshire, from the larger towns to small villages. Our nearest city page is Manchester, about 46 miles away.
Every address in DE55 is covered. Jobs here include addresses on Erewash Street, Main Road and Alfreton Road and the roads around them. We also cover the places around Pye Bridge: Pye Hill (1 mile south), Lower Birchwood (1 mile north-west), Upper Birchwood (1 mile north-west), Jacksdale (1 mile south-east) and Ironville (1 mile south). Further out, we also cover Chesterfield (12 miles north), Ilkeston (7 miles south), Long Eaton (13 miles south), Belper (6 miles south-west), Heanor (4 miles south) and Ripley (3 miles south-west).
Near you in Pye Bridge
Typical jobs here are in homes near Ironville and Codnor Primary School, The Seven Stars pub and Selston Arts and Community College, among other places. The nearest railway station is Alfreton station, roughly 2.3 miles north-west. Further afield, we also cover the area around John King Workshop Museum (1.7 miles north-east) and Designer Outlet East Midlands (2.8 miles north-east).
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- The material and finish
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The colour and finish to match
Our prices are the same across the UK, with no extra for Pye Bridge. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
Send us photos of the damage and a wider shot of the whole item, and tell us you are in Pye Bridge, and we’ll come back with a fixed quote.
What we cannot put right
It helps to know what we can’t do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer before booking.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Landlords, agents and businesses in Pye Bridge
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Should you replace it?
Many people think a damaged bath means a new one. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why book with us
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- Work done at your home or business
Read our pricing and bath cost comparison.
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Common questions in Pye Bridge
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How long before I can use the bath?
Typically the following day. We confirm the time before we leave.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you come to Pye Bridge?
Yes, we do. We send a technician to Pye Bridge for every job, with no extra charge for travel.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
