Nottinghamshire · England

Bath Repair in Ironville

Chip and crack repairs to enamel, acrylic and cast iron baths in Ironville, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Rust by the waste and overflow
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Ironville homes

Signs you need bath repair in Ironville

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

It’s worth getting a quote if you see:

  • A failed DIY repair that is discoloured or lifting
  • Rust by the waste and overflow
  • Cracks in an acrylic bath
  • Deep scratches in acrylic

Questions to ask before you book

  • Whether the colour is mixed to match
  • What prep work is covered
  • How changes to the job are handled
  • Whether the price covers travel

Our hiring checklist

About our bath repair in Ironville

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. We regularly repair acrylic, whirlpool & spa baths and pressed steel enamel, and the jobs we see most are rusty patches near the plughole and chips under the taps.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.

Where
Ironville (NG16)
County
Nottinghamshire
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

About Ironville

Ironville is about 2 miles east of Ripley, in Nottinghamshire. Our repair technicians come to customers in Ironville, so nothing has to leave your home. Ironville is one of 329 towns and villages in Nottinghamshire we cover. Our jobs stretch from Ironville to Manchester (about 46 miles away).

We cover every part of the NG16 postcode area and the streets around it. From Market Place, Market Street and Station Road or anywhere nearby, we can come to you. Neighbouring places we cover include Pye Hill (1 mile east), Jacksdale (1 mile east), Pye Bridge (1 mile north), Golden Valley (1 mile west) and Westwood (1 mile east). We also work in nearby towns such as Mansfield (9 miles north-east), Beeston (11 miles south-east), Carlton (12 miles south-east), Sutton in Ashfield (6 miles north-east), Hucknall (6 miles east) and West Bridgford (13 miles south-east).

Around Ironville

Locally, our jobs take us to homes close to New Inn, Selston Arts and Community College and Ironville and Codnor Primary School, among other places. For rail, the closest station is Alfreton station, about 2.9 miles north. Nearby you will also find John King Workshop Museum (2.5 miles north-east) and Ripley Hospital (2.7 miles west).

Map of Ironville © OpenStreetMap contributors

Common questions in Ironville

Do you repair coloured baths?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Can you redo an old repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

How do I get a price for bath repair in Ironville?

Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your NG16 postcode.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you repair a hole in a bath?

Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

What happens on the day

Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a few hours. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can usually use the bath the following day.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can
  • Let us know about parking or access

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Send photos for a quote

Related advice

Honest limits

Not everything can be repaired, and we will tell you before we start. We cannot fix:

  • Leaking fittings, which need a plumber
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • A steel bath rusted through

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Cast iron enamel

Looking after it afterwards

It’s all simple stuff:

  • Stick to mild cleaners and a soft cloth
  • Have new chips seen to early
  • Cover the bath during DIY or decorating
  • Keep metal cans and razors off the surface

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

Repair or replace in Ironville?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

What you get with us

  • No need to remove anything
  • One visit for most repairs
  • Same prices wherever you are
  • CHAS, Constructionline and SafeContractor accredited

Read our prices page and resurfacing vs replacement cost guide.

Landlord and trade work in Ironville

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What affects the price in Ironville

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • How many areas need work
  • What the surface is made of
  • The colour and finish to match
  • How many items we do on one visit

Our prices are the same across the UK, so there’s no premium for Ironville. What changes the price is the job itself: the material, the amount of damage and how many items.

Send pictures for a quote

Before you send photos, a few simple things make all the difference:

  • A coin beside the damage so we can judge size
  • A photo taken from further back
  • Good light, ideally daylight, without flash glare
  • Any details about the material

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.

What your bath is made of matters

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.