Swansea · Wales
Bath chip & crack repair in Pyle, Swansea
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Pyle. Free, fixed quotes from your photos.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rusty patches near the plughole
Bath repair at your home in Pyle
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and acrylic, and common reasons people contact us are a cracked acrylic bath and rust by the waste and overflow.
All our work comes with our one-year guarantee, wherever you are in Swansea.
- Location
- Pyle (SA3)
- Area hub
- Swansea
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Landlord and trade work in Pyle
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
The process
Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes two to three hours for most chips, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the following day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Read more
Covering Pyle
Pyle is about 6 miles south-west of Swansea, in Swansea. Jobs in Pyle are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Pyle is one of 153 places in Swansea we cover.
Our technicians cover all of the SA3 postcode area and the streets around it. You will find streets such as Headland Road, Headland Close and Brandy Cove Road, and we cover them all. We also cover the places around Pyle: Bishopston (1 mile north), Murton (1 mile north-east), Caswell (1 mile south-east), Manselfield (1 mile north-east) and Kittle (1 mile north-west). Further out, we also cover Swansea (6 miles north-east), Castle (6 miles north-east), Morriston (8 miles north-east), Mount Pleasant (5 miles north-east), Gorseinon (6 miles north) and Dyfaty (6 miles north-east).
Local landmarks in Pyle
In Pyle, that means homes near Church of St Teilo, Plough & Harrow pub and Bishopston Comprehensive School, among other places. Other landmarks nearby include Bishopston Old Castle (1.1 miles north) and Egypt Centre - Swansea University (3.8 miles north-east). Not far away are Pwlldu Head and Bishop's Wood.
Places near Pyle
Also in Pyle
Looking after it afterwards
How the surface is treated afterwards matters:
- Get a dripping tap fixed promptly
- Don’t leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Do not leave razors or cans standing in the bath
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. We charge the same wherever you are, so there’s no premium for Pyle. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Every repair guaranteed for a year
- A fixed quote before you book
Take a look at our prices page or bath cost comparison.
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Pyle questions
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you cover Pyle?
We do. Repair technicians travel to Pyle from across the region, and the price is the same as everywhere else.
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price is based on:
- What kind of damage it is
- Unusual colours or finishes
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- Details of any past repairs
- A wider photo showing the whole bath
- The material, if you know it
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
