Swansea · Wales
Bath chip & crack repair in Murton, Swansea
Bath repair in Murton without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Rusty patches near the plughole
- A hole punched through by something heavy
Bath repair in Murton, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair pressed steel enamel, acrylic and whirlpool & spa baths, and the jobs we see most are chips along the edge of the bath and damage beneath the taps.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Murton (SA3)
- Area hub
- Swansea
- Cover
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t leave razors or cans standing in the bath
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
When to call us in Murton
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The things clients normally mention when they call include:
- A cracked acrylic bath
- Rust by the waste and overflow
- Chips on the rim or sides
- Chips caused by builders
What your quote should include
- What happens if they find more damage
- What aftercare is recommended
- Whether there are any call-out or travel charges
- Whether they match the colour on site
Murton questions
Can you price it without visiting?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Swansea.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Do you work in Murton?
Yes. We work across the UK and come to Murton and the rest of Swansea. Send photos and we will quote, or call 0345 017 0787.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Which areas do you work in?
The entire UK, including all of Swansea. Send your postcode with your pictures and we’ll offer you dates.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Murton and nearby
Murton is about 5 miles south-west of Swansea, in Swansea. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We cover 153 places in Swansea.
Jobs in SA3 work the same way as everywhere else we cover. From Tudor Court, Tudor Way and Long Acre or a nearby road, we can come to you. We also cover the places around Murton: Bishopston (1 mile west), Pyle (1 mile south-west), Manselfield (1 mile east), Kittle (1 mile west) and Caswell (1 mile south). Further out, we also cover Swansea (5 miles north-east), Castle (5 miles north-east), Morriston (8 miles north-east), Mount Pleasant (5 miles north-east), Gorseinon (6 miles north) and Dyfaty (5 miles north-east).
Near you in Murton
Locally, our jobs take us to homes close to Church of St Teilo, Bishopston Comprehensive School and Plough & Harrow pub. The closest station to Murton is Gowerton station, roughly 4.6 miles north. Nearby you will also find Bishopston Old Castle (0.7 miles north) and Egypt Centre - Swansea University (3.4 miles north-east). For a walk, there is Bishop's Wood and Clyne Common.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
What a repair can’t fix
We would rather lose a job than do one that won’t last, so these are the limits:
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
What bath repair costs
Prices start from £95. You won’t pay by the hour. The price is based on:
- The material and finish
- The colour and finish to match
- Previous DIY repairs that have to come out
- Doing more than one item at once
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Landlords, agents and businesses in Murton
If you manage property in Murton, we’ll quote for several properties at once. Just send pictures for each address and we’ll price them together.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Murton
What else we do in Murton
About our accreditations · Every repair comes with a one-year guarantee.
