Somerset · England
Bath Repair in Queen Camel
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Queen Camel, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- Damage beneath the taps
Repair or replace in Queen Camel?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why choose Surface Doctor in Queen Camel
- Straight answers about what a repair can do
- Colour mixed on the day to match
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
Take a look at our pricing or guide to resurfacing and replacement costs.
About our bath repair in Queen Camel
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Common call-outs are for cracks in an acrylic bath and rust spots around the plughole, in cast iron enamel, acrylic and pressed steel enamel.
All our work is covered by our one-year guarantee, wherever you are in Somerset.
- Where
- Queen Camel (BA22)
- County
- Somerset
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Queen Camel and the surrounding area
Queen Camel is about 6 miles north-east of Yeovil, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Our technicians cover all of the BA22 postcode area and the streets around it. Local streets include High Street, Mildmay Drive and Laurel Lane, all of which we cover. We also travel to Wales (1 mile west), Eyewell (1 mile north-west), Lambrook (1 mile south), Sparkford (1 mile north-east) and Sutton Montis (2 miles east). Larger places within reach include Yeovil (6 miles south-west), Wells (13 miles north), Shepton Mallet (12 miles north), Street (10 miles north-west), Glastonbury (11 miles north-west) and Crewkerne (13 miles south-west).
Landmarks near Queen Camel
Our customers here include homes close to Church of St Barnabas, Countess Gytha Primary School and Mildmay Arms, among other places. A little further out are Yeovil Hospital (5.8 miles south-west) and Haynes Motor Museum (1.6 miles north-east).
What affects the price in Queen Camel
Repairs from £95. You’ll know the full cost before you book. We look at:
- The size and number of damaged areas
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The type of damage
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Honest limits
In fairness, there are a few things a repair will not fix:
- A steel bath rusted through
- Leaking fittings, which need a plumber
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
FAQs for Queen Camel
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
When can I have a bath again?
Most baths can be used the following day. We confirm the time before we leave.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
How do I get a price for bath repair in Queen Camel?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Is a holed acrylic bath repairable?
Normally. Photos of the hole and the underside help us check.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Signs you need bath repair in Queen Camel
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
- Rust by the waste and overflow
- Impact holes in acrylic
What your quote should include
- How the colour is matched
- What protection goes down before work starts
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
Nearby places to Queen Camel
More services for Queen Camel
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Landlords, letting agents and housing providers in Queen Camel use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
