Somerset · England
Bath chip & crack repair in Lambrook, Somerset
We travel to Lambrook for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Scuffs and scratches in the surface
About our bath repair in Lambrook
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in a single visit. Whether it’s damage done while the bathroom was being fitted and chips along the edge of the bath, we can usually put it right.
You are covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Lambrook (BA22)
- Area hub
- Somerset
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- Everything repaired in place
- A year’s guarantee on all work
- Colour-matched on site
- No extra charge for your area
Take a look at our prices page or resurfacing vs replacement cost guide.
Your questions about bath repair in Lambrook
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Lambrook.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can you repair a hole in a bath?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Looking after it afterwards
How the surface is treated afterwards matters:
- A dripping tap stains enamel, so fix it early
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Rinse it down after each bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
When a repair is not the answer
It helps to know what we cannot do too:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Lambrook and the surrounding area
Lambrook is about 5 miles north-east of Yeovil, in Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 640 towns and villages across Somerset, from the larger towns to small villages.
Jobs in BA22 are booked in the same way as anywhere else. Other places close to Lambrook include Queen Camel (1 mile north), Wales (1 mile north), Eyewell (1 mile north), Sparkford (2 miles north) and Sutton Montis (2 miles north-east). Larger places within reach include Yeovil (5 miles south-west), Wells (14 miles north), Shepton Mallet (12 miles north), Street (11 miles north-west), Glastonbury (11 miles north-west) and Crewkerne (13 miles south-west).
What’s near Lambrook
In Lambrook, that means homes near Countess Gytha Primary School, Marston Inn and Church of St Mary, among other places. The closest station to Lambrook is Yeovil Pen Mill station, roughly 4.7 miles south. Well-known places in the area include Yeovil Hospital (5 miles south-west) and Haynes Motor Museum (2.4 miles north).
What we are called out for in Lambrook
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Most people get in touch after spotting something like this:
- Impact holes in acrylic
- Chips along the edge of the bath
- A kit repair that didn’t last
- Rust by the waste and overflow
Comparing quotes
- How soon you can use it again
- What aftercare is recommended
- What prep work is covered
- How the room is protected while they work
Landlords, agents and businesses in Lambrook
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Lambrook
More services for Lambrook
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
How to get a price
Send us pictures of the damage and a wider shot of the whole item, and tell us you’re in Lambrook, and we will reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
