Surrey · England
Bath Repair in Ramsnest Common
Chip and crack repairs to enamel, acrylic and cast iron baths in Ramsnest Common, carried out at your home and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
A repaired bath needs no special treatment. Skip bleach and gritty creams and rinse after use.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
How we handle bath repair in Ramsnest Common
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. We work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and the jobs we see most are holes from dropped items and chips along the edge of the bath.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Ramsnest Common (GU8)
- County
- Surrey
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Ramsnest Common and nearby
Ramsnest Common is about 11 miles south-east of Farnham, in Surrey. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We work in 395 places in Surrey, from the larger towns to small villages. Our jobs stretch from Ramsnest Common to London (37 miles away).
Postcode districts we cover here: GU8. Local streets include Killinghurst Lane, Petworth Road and Cripplecrutch Hill, and we cover them all. We also cover the places around Ramsnest Common: Shillinglee (1 mile south-east), Ansteadbrook (1 mile south-west), Northchapel (2 miles south), Ebernoe (4 miles south-east) and Lurgashall (4 miles south). We also work in nearby towns such as Guildford (11 miles north), Farnham (11 miles north-west), Haslemere (3 miles west), Cranleigh (8 miles north-east), Ash (11 miles north) and Godalming (7 miles north).
What’s near Ramsnest Common
Ramsnest Common’s nearest station is Witley station, roughly 3 miles north of the centre. A little further out are Haslemere and District Hospital (2.7 miles west). Green spaces nearby include Blackdown and Shillinglee Lake.
Why repair rather than replace?
People frequently assume a cracked or chipped bath has to come out. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- A fixed quote before you book
- No need to remove anything
Read our prices page or resurfacing vs replacement cost guide.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we cannot get to from below
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
What we’re called out for in Ramsnest Common
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- Snagging damage from a refit
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Deep scratches in acrylic
Questions to ask before booking
- How soon you can use it again
- Who turns up on the day
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
Your questions about bath repair in Ramsnest Common
When can I have a bath again?
Usually within a day, depending on the repair.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
What areas do you cover?
We work UK-wide, and that includes Ramsnest Common. Our prices are the same everywhere.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Nearby places to Ramsnest Common
Also in Ramsnest Common
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
