Cumbria · England
Bath Repair for Ravenstonedale homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Ravenstonedale, with a one-year guarantee on every repair.
- Repairs from £95
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Ravenstonedale. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Ravenstonedale
- No need to remove anything
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
Read our full price list or bath cost comparison.
How we handle bath repair in Ravenstonedale
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Our repair technicians work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and people most often call us about snagging damage from a refit and cracks in an acrylic bath.
Every repair comes with a one-year guarantee.
- Where
- Ravenstonedale (CA17)
- County
- Cumbria
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Common problems we fix in Ravenstonedale
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
People normally call us when they notice one of these:
- Rust by the waste and overflow
- Chips on the rim or sides
- Damage beneath the taps
- Scuffs and scratches in the surface
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- How the room is protected while they work
- What happens if the damage is worse than the photos show
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
Common questions in Ravenstonedale
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
When can I have a bath again?
Normally by the following day, depending on the repair.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How we price bath repair
Prices start from £95. You will know the full cost before you book. We take into account:
- The material
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. You will see the full price before you book.
Getting a price from pictures
Phone pictures are fine. Ensure they show:
- A close-up of the damage, in focus
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
To get a price, send two or three photos using our quote form or ring us. We will say right away if a repair is the right fix.
Also near Ravenstonedale
Other services in Ravenstonedale
Our work in Ravenstonedale
Ravenstonedale is about 15 miles north-east of Kendal, in Cumbria. From the centre of Ravenstonedale to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 438 places across Cumbria, from the larger towns to small villages. We work right across the region, from Ravenstonedale to Newcastle upon Tyne (50 miles away).
Our visits in CA17 are booked in the same way as anywhere else. Close by, we cover Greenside (1 mile south-west), Newbiggin-on-Lune (1 mile north-west), Smardale (3 miles north-east), Waitby (3 miles north-east) and Wharton (3 miles east). Larger places within reach include Kendal (15 miles south-west), Appleby-in-Westmorland (10 miles north), Sedbergh (9 miles south-west), Kentrigg (14 miles south-west), Kirkby Stephen (4 miles north-east) and Bongate (10 miles north).
Around Ravenstonedale
Around Ravenstonedale, we work in homes near King's Head Hotel and St Oswald's Church and the streets around them. Ravenstonedale’s nearest station is Kirkby Stephen station, roughly 2.9 miles north-east. Further afield, we also cover the area around Lammerside Castle (3.2 miles east). Green spaces nearby include Birkett Common.
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think before you book.
What we work on
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Landlord and trade work in Ravenstonedale
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
