Cumbria · England
Bath chip & crack repair in Smardale, Cumbria
Bath repair for Smardale, without a refit. Send us photos for a fixed price, then book a visit.
- Repairs from £95
- Impact holes in acrylic
- Cracks in an acrylic bath
FAQs for Smardale
What areas do you cover?
All of Cumbria, and the rest of the UK. Travel is included in the price.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Bath repair in Smardale, done in place
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. If you are dealing with scuffs and scratches in the surface and rusty patches near the plughole, we can help.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Smardale (CA17)
- County
- Cumbria
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
For landlords and businesses
For anyone letting property in or around Smardale, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- Where you are, by postcode
- Natural light rather than flash
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Also near Smardale
Also in Smardale
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Smardale
- Nothing taken out or refitted
- Every repair guaranteed for a year
- A fixed quote before you book
- Dust sheets down, tidy finish
Read our pricing and bath cost comparison.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Our work in Smardale
Smardale is about 17 miles north-east of Kendal, in Cumbria. We visit homes and businesses in Smardale, so there’s no workshop to go to. We work in all 438 towns and villages across Cumbria, from the larger towns to small villages. Our jobs stretch from Smardale to Newcastle upon Tyne (about 47 miles away).
Postcode districts we cover here: CA17. We also travel to Waitby (1 mile east), Crosby Garrett (1 mile north-west), Soulby (2 miles north), Kirkby Stephen (2 miles east) and Ravenstonedale (3 miles south-west). Larger places within reach include Appleby-in-Westmorland (8 miles north-west), Sedbergh (11 miles south-west), Bongate (8 miles north-west) and Shap (12 miles west).
What’s near Smardale
Typical jobs here are in homes near St Andrew's Church and Kirkby Stephen Grammar School and the streets around them. For rail, the closest station is Kirkby Stephen station, about 1.7 miles south-east. Nearby you’ll also find Hartley settlement (2.9 miles east). The countryside around Smardale includes Birkett Common.
Do you need bath repair in Smardale?
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Clients usually contact us about:
- Scratches you can feel with a fingernail
- Rust spots around the plughole
- Cracks in an acrylic bath
- A kit repair that didn’t last
What to look for in a quote
- Whether the price covers travel
- When it can be used again
- What prep work is covered
- How to look after the finish
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours, depending on the damage in most cases. We leave the room clean.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
Get a quote
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
