Hampshire · England
Bath Repair in Blashford
Damaged bath in Blashford? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
How we handle bath repair in Blashford
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. We’re frequently asked to fix a hole punched through by something heavy and scratches you can feel with a fingernail, on acrylic, pressed steel enamel and cast iron enamel.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Area
- Blashford (BH24)
- County
- Hampshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Blashford
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.
Common reasons people in Blashford contact us are:
- Chips caused by builders
- Rust spots around the plughole
- Chips under the taps
- Holes from dropped items
Comparing quotes
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
Repair or replace in Blashford?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- No need to remove anything
- We come to you, anywhere in the UK
- Colour-matched on site
- CHAS and Constructionline accredited
Read our prices page and bath cost comparison.
Honest limits
A few problems are outside what a surface repair can do:
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
Prices and what affects them
Prices start from £95. We price every job individually. What matters most is:
- Access to the area
- The material
- The type of damage
- How many items we do on one visit
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed quote
You can normally get a fixed quote without us visiting. To make it quick:
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Any details about the material
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Also in Blashford
How it works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Getting a price
Email us photos of the damage and a wider shot of the whole item, and tell us you’re in Blashford, and we’ll come back with a fixed quote.
Advice
Our work in Blashford
Blashford is about 4 miles east of Verwood, in Hampshire. Jobs in Blashford are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 683 places in Hampshire, from the larger towns to small villages.
Postcode districts we cover here: BH24. We regularly work on streets such as Snails Lane, Ivy Lane and Woolmer Lane and the roads around them. Nearby, we also work in Ellingham (1 mile north-west), Rockford (1 mile north-east), Poulner (1 mile south-east), Highwood (1 mile east) and Ringwood (1 mile south). Within a short drive, we also cover Totton (13 miles east), Lymington (13 miles south-east), New Milton (9 miles south-east), Barton on Sea (10 miles south-east), Marchwood (15 miles east) and Ashley (9 miles south-east).
Around Blashford
Our clients here include homes close to Church of St Mary and All Saints, Ringwood School Academy and Alice Lisle Inn, among other places. Well-known places in the area include St Leonard's Hospital (4.5 miles south-west). Not far away are Blashford Lakes and Linbrook Lake.
Aftercare tips
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
FAQs for Blashford
What happens after I send photos?
We review the pictures and send a fixed quote with dates.
Do you cover the whole of Hampshire?
Across the UK, and that includes Blashford. Prices do not change with location.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How much does bath repair cost in Blashford?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
