East Riding of Yorkshire · England
Bath Repair in Rise
Bath repair across Rise and nearby, generally in one visit.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Bath repair in Rise, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for damage done while the bathroom was being fitted and rusty patches near the plughole, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Rise (HU11)
- County
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. There is no charge for travel to Rise. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How many areas need work
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
How to get a fixed quote
Phone photos are fine. Just ensure we can see:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Any details about the material
- Details of any past repairs
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Rise questions
Can you quote from photos?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Do you work in Rise?
We do. Technicians travel to Rise from across the region, and the price is the same as everywhere else.
What areas do you cover?
We work UK-wide. Our prices are the same everywhere.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Rise and the surrounding area
Rise is about 8 miles east of Beverley, in East Riding of Yorkshire. From the centre of Rise to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Rise is one of 299 towns and villages in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 53 miles away.
All of HU11 is covered. Nearby, we also work in Long Riston (2 miles west), Arnold (2 miles west), New Ellerby (2 miles south), Skirlaugh (2 miles south-west) and Sigglesthorne (2 miles north). Larger places within reach include Beverley (8 miles west), Driffield (12 miles north-west), Hessle (13 miles south-west), Cottingham (9 miles south-west), Hornsea (4 miles north-east) and Hedon (9 miles south).
Landmarks near Rise
Around Rise, we work in homes near Church of All Saints, among other places. A little further out are Hornsea Cottage Hospital (4.7 miles north-east). Open spaces near Rise include Hornsea Mere.
More services for Rise
What we do, step by step
We turn up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Honest limits
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we can’t reach from underneath
Send us pictures and we will tell you honestly before you book.
Materials we work on in Rise
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Why book with us
- Nothing taken out or refitted
- No extra charge for your area
- Most jobs done in one visit
- Dust sheets down, tidy finish
Read our pricing or bath cost comparison.
Landlords, agents and businesses in Rise
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Common problems we fix in Rise
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
The things customers usually mention when they call are:
- Rust by the waste and overflow
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
What to look for in a quote
- How to look after the finish
- What preparation is included
- When it can be used again
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
