East Riding of Yorkshire · England
Bath Repair for New Ellerby homes
We travel to New Ellerby for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Scratches you can feel with a fingernail
What bath repair costs
Prices start from £95. There’s no area surcharge for New Ellerby. What changes the price is:
- What kind of damage it is
- The colour and finish to match
- Whether we combine several jobs
- The material and finish
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- Natural light rather than flash
- Any details about the material
- A coin beside the damage so we can judge size
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our bath repair in New Ellerby
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We are often asked to fix impact holes in acrylic and chips under the taps, in roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Where
- New Ellerby (HU11)
- Region
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Put a towel in the bath if you are working above it
- Give the bath a quick rinse after use
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
How the visit works
We agree an arrival time beforehand. On site, it takes a few hours for most jobs. The room is left tidy.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Questions from New Ellerby
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What happens next?
You’ll get a fixed quote back, usually with dates to choose from. There is no obligation to book.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Repairing versus replacing in New Ellerby
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for New Ellerby. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- We leave the room as we found it
- Every repair guaranteed for a year
- Colour mixed on the day to match
- One price list for the whole UK
See our prices page or resurfacing vs replacement cost guide.
Places near New Ellerby
Other services in New Ellerby
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Our work in New Ellerby
New Ellerby is about 7 miles north-east of Kingston upon Hull, in East Riding of Yorkshire. Anywhere in HU11, a technician comes to you. New Ellerby is one of 299 towns and villages in East Riding of Yorkshire we cover. Our nearest city page is Leeds, about 54 miles away.
Jobs in HU11 are booked in the same way as anywhere else. That includes homes on Langthorpe Road, Lambwath Lane and Marton Road and the roads around them. Neighbouring places we cover include Old Ellerby (1 mile south), Skirlaugh (2 miles west), Rise (2 miles north), Coniston (3 miles south) and Arnold (3 miles north-west). Within a short drive, we also cover Beverley (8 miles west), Driffield (14 miles north-west), Hessle (12 miles south-west), Cottingham (9 miles south-west), Hornsea (5 miles north-east) and Hedon (7 miles south).
Near you in New Ellerby
Our customers here include homes close to St James and The Railway Inn and the streets around them. Nearby you’ll also find Princess Royal Hospital (4.8 miles south-west) and Aldbrough Castle (4.5 miles east). The countryside around New Ellerby includes Hornsea Mere.
About our accreditations · Every repair comes with a one-year guarantee.
