Hampshire · England
Bath Re-enamelling for Rogate homes
Bath re-enamelling across Rogate and nearby, typically in one visit.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day for most jobs. The room is left tidy and ready to use once it has cured.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Let us know which floor the room is on
- Let us know about parking or access
- Clear the area around the damage
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you are under no obligation.
Read more
About our bath re-enamelling in Rogate
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair acrylic baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are an old resurfacing that’s failing and worn patches where water runs and sits.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Rogate (GU31)
- County
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Rogate
More services for Rogate
Your questions about bath re-enamelling in Rogate
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will there be a smell?
There may be a mild smell during the work.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps quickly
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
- Don’t let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we’re called out for in Rogate
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
- A roll-top that’s seen better days
- Staining under the taps and around the waste
What your quote should include
- What the guarantee covers, and for how long
- How changes to the job are handled
- Who will actually do the work
- Whether there are any call-out or travel charges
Rogate and the surrounding area
Rogate is about 4 miles east of Petersfield, in Hampshire. Our repair technicians come to clients in Rogate, so there’s no workshop to go to. Rogate is one of 683 towns and villages in Hampshire where we work. Our nearest city page is London, about 47 miles away.
Postcode districts we cover here: GU31. From Red House Court, Habin Hill and Parsonage Estate or a nearby road, we can come to you. If you’re just outside Rogate, we cover Borden (1 mile north-east), Trotton Marsh (2 miles north-east), Hill Brow (2 miles north-west), Chithurst (2 miles east) and Durford Wood (2 miles north-west). Within a short drive, we also cover Havant (12 miles south-west), Horndean (10 miles south-west), Alton (11 miles north-west), Waterlooville (12 miles south-west), Petersfield (4 miles west) and Purbrook (12 miles south-west).
Local landmarks in Rogate
Typical jobs here are in homes near The Parish Church of St Bartholomew and Rogate CofE Primary School. Rogate’s nearest station is Liss station, about 3.2 miles north-west of the centre. A little further out are Bear Museum (3.7 miles west) and Petersfield Community Hospital (4 miles west). The countryside around Rogate includes Iping and Stedham Commons and Wheeler's Down.
Prices and what affects them
Resurfacing from £350. We price every job individually. The main factors are:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
How to get a fixed quote
You can normally get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- A fixed quote before you book
- One-year guarantee on every repair
- One visit for most repairs
- We leave the room as we found it
Read our full price list and resurfacing vs replacement cost guide.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Rogate
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
