Cumbria · England
Bath Repair in Rookby
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Rookby and across Cumbria. Free, fixed quotes from your pictures.
- Repairs from £95
- A hole punched through by something heavy
- Scuffs and scratches in the surface
Bath repair at your home in Rookby
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. We are frequently asked to fix holes from dropped items and rust spots around the plughole, across whirlpool & spa baths, acrylic and pressed steel enamel.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Rookby (CA17)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Rookby
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Prices start from £95. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
Take a look at our pricing and guide to resurfacing and replacement costs.
FAQs for Rookby
Can pets and children be at home?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Which areas do you work in?
The whole UK, including all of Cumbria. Send your postcode with your pictures and we’ll confirm dates.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
About Rookby
Rookby is about 21 miles north-east of Kendal, in Cumbria. Jobs in Rookby are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our repair technicians cover 438 places across Cumbria. Our jobs stretch from Rookby to Newcastle upon Tyne (about 43 miles away).
All of CA17 is covered, from the main roads to the quietest streets. We also travel to Church Brough (2 miles north), Brough (2 miles north), Kirkby Stephen (2 miles south-west), Great Musgrave (3 miles north-west) and Helbeck (3 miles north). We also work in nearby towns such as Appleby-in-Westmorland (9 miles north-west), Sedbergh (15 miles south-west), Bongate (9 miles north-west) and Shap (15 miles west).
Near you in Rookby
Around Rookby, we work in homes near Kirkby Stephen Grammar School, among other places. The closest station to Rookby is Kirkby Stephen station, roughly 3.7 miles south-west. A little further out are Augill Castle (1.8 miles north). Not far away are Stainmore Summit and Brownber Tarn.
Nearby places to Rookby
What else we do in Rookby
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We take into account:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The colour and finish to match
- The material and finish
Our prices are the same across the UK, with no extra for Rookby. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the following day, the bath is ready to use.
How to prepare
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- A dripping tap stains enamel, so fix it early
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Signs you need bath repair in Rookby
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
The most common problems we’re called about are:
- Holes from dropped items
- A kit repair that didn’t last
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
What to look for in a quote
- How long it needs to cure
- Who turns up on the day
- How your room will be protected
- How the colour is matched
About our accreditations · Every repair comes with a one-year guarantee.
