Norfolk · England
Bath chip & crack repair in Rushford, Norfolk
Damaged bath in Rushford? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A hole punched through by something heavy
- Chips along the edge of the bath
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our bath repair in Rushford
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in a single visit. We work on cast iron enamel, roll-top & freestanding and acrylic, and people most frequently call us about a chipped rim or side and an old repair that has yellowed or come loose.
We stand behind the work with a one-year guarantee.
- Location
- Rushford (IP24)
- Region
- Norfolk
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Rushford
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Clients generally contact us about:
- A chip where the taps sit
- Rust by the waste and overflow
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
What to look for in a quote
- Who turns up on the day
- What aftercare is recommended
- If travel is included in the price
- How soon you can use it again
What we do, step by step
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a morning or an afternoon.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Towns and villages near Rushford
What else we do in Rushford
Landlord and trade work in Rushford
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Aftercare tips
To keep it looking its best:
- Give the bath a quick rinse after use
- Ensure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Covering Rushford
Rushford is about 4 miles south-east of Thetford, in Norfolk. Anywhere in IP24, a technician comes to you. Our repair technicians cover 797 places across Norfolk. We work right across the region, from Rushford to London (about 73 miles away).
Our technicians cover all of the IP24 postcode area and the streets around it. Nearby, we also work in Coney Weston (3 miles south-east), Little Fakenham (3 miles south-west), Fakenham Magna (3 miles south), Barningham (4 miles south-east) and Sapiston (4 miles south). Within a short drive, we also cover Thetford (4 miles north-west), Attleborough (11 miles north-east), Watton (12 miles north), Feltwell (14 miles north-west), Hingham (15 miles north-east) and East Harling (5 miles north-east).
Landmarks near Rushford
Around Rushford, we work in homes near Church of St John the Evangelist. Rushford’s nearest station is Thetford station, roughly 3.9 miles north-west of the centre. Nearby you will also find Fakenham Magna (3.3 miles south) and Dad's Army Museum (3.5 miles west). Not far away are Knettishall Heath.
- Other local spots include Great and Little Snarehill (2.5 miles west)
Your questions about bath repair in Rushford
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Which areas do you work in?
We work UK-wide, and that includes Rushford. Our prices are the same everywhere.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Repair or replace in Rushford?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
What you get with us
- We’ll tell you if it’s not worth repairing
- Fixed prices from your pictures
- Colour-matched on site
- CHAS and Constructionline accredited
Take a look at our prices page or guide to resurfacing and replacement costs.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we can’t put right
We won’t take on work that will not last, so these are the limits:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly.
Materials we work on in Rushford
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
