Warwickshire · England
Bath chip & crack repair in Ryton-on-Dunsmore, Warwickshire
Bath repair for Ryton-on-Dunsmore, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
What bath repair costs
Repairs from £95. We charge the same across the UK, including Ryton-on-Dunsmore. What changes the price is:
- The material and finish
- Doing more than one item at once
- What kind of damage it is
- How many areas need work
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- The postcode, so we can plan the visit
- Natural light rather than flash
- Whether it’s been repaired or coated before
- A picture taken from further back
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Bath repair in Ryton-on-Dunsmore without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a cracked acrylic bath and rust spots around the plughole, we can usually put it right.
Every repair comes with our one-year guarantee, wherever you are in Warwickshire.
- Area
- Ryton-on-Dunsmore (CV8)
- County
- Warwickshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your pictures didn’t show, we will explain it before carrying on.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Read more
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- If an acrylic bath flexes, have its feet adjusted
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
About Ryton-on-Dunsmore
Ryton-on-Dunsmore is about 4 miles south-east of Coventry, in Warwickshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Ryton-on-Dunsmore is one of 324 places in Warwickshire we cover. You can also see our page for Birmingham, about 21 miles away.
Here we cover the CV8 postcode area. From High Street, London Road and Church Road or a nearby road, we can come to you. We also travel to Toll Bar End (2 miles north-west), Bubbenhall (2 miles south-west), Stretton-on-Dunsmore (2 miles south-east), Brandon (2 miles north-east) and Willenhall (2 miles north-west). We also work in nearby towns such as Rugby (8 miles east), Nuneaton (11 miles north), Warwick (8 miles south-west), Royal Leamington Spa (6 miles south-west), Bedworth (8 miles north) and Leamington Spa (7 miles south-west).
What’s near Ryton-on-Dunsmore
Our customers here include homes close to Provost Williams CofE Primary School, Ernesford Grange School & Community College and Church of St Leonard. Ryton-on-Dunsmore’s nearest station is Coventry station, roughly 4.1 miles north-west. Other landmarks nearby include Brandon Castle (1.7 miles north-east) and University Hospital Coventry (3.9 miles north). Green spaces nearby include Brandon Marsh.
Honest limits
We would rather lose a job than do one that won’t last, so these are the limits:
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
FAQs for Ryton-on-Dunsmore
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you price it without visiting?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Do you work in Ryton-on-Dunsmore?
Yes. We work across the UK and travel to Ryton-on-Dunsmore. Send us pictures for a fixed quote, or call 0345 017 0787.
Nearby places to Ryton-on-Dunsmore
Other services in Ryton-on-Dunsmore
When to call us in Ryton-on-Dunsmore
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Keep an eye out for these signs:
- Rust spots around the plughole
- Chips under the taps
- Impact holes in acrylic
- Chips caused by builders
What your quote should include
- Whether the price covers travel
- What aftercare is recommended
- What protection goes down before work starts
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
