Wiltshire · England
Bath chip & crack repair in Sandy Lane, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Sandy Lane, with a one-year guarantee on every repair.
- Repairs from £95
- Impact holes in acrylic
- Snagging damage from a refit
Bath repair at your home in Sandy Lane
A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. Whether it’s deep scratches in acrylic and rusty patches near the plughole, we can generally put it right.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Sandy Lane (SN15)
- Region
- Wiltshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Sandy Lane
Sandy Lane is about 3 miles south-west of Calne, in Wiltshire. Across the SN15 area, we come to you. Sandy Lane is one of 425 places in Wiltshire we cover. Our nearest city page is Birmingham, about 74 miles away.
We cover every part of the SN15 postcode area and the streets around it. If you’re just outside Sandy Lane, we cover Chittoe Heath (1 mile south), Chittoe (1 mile south-west), Westbrook (2 miles south-west), Bromham (2 miles south) and Derry Hill (2 miles north). Larger places within reach include Trowbridge (9 miles south-west), Chippenham (5 miles north-west), Calne (3 miles north-east), Devizes (5 miles south-east), Westbury (12 miles south-west) and Melksham (4 miles south-west).
Local landmarks in Sandy Lane
Around Sandy Lane, we work in homes near Church of St Nicholas and Kingsbury Green Academy and the streets around them. For rail, the closest station is Melksham station, roughly 4.5 miles south-west of the centre. A little further out are Shane's Castle (4.3 miles south-east) and Spye Park Stables Museum (1.1 miles south-west). Open spaces near Sandy Lane include King's Play Hill.
Also near Sandy Lane
What else we do in Sandy Lane
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Repair or replace: which is better?
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- One-year guarantee on every repair
- Same prices wherever you are
- Nothing taken out or refitted
- Free fixed quotes from pictures
Take a look at our pricing or bath cost comparison.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Sandy Lane: your questions answered
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Can rust on a bath be repaired?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you need bath repair in Sandy Lane?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
These are the problems we’re asked about most:
- Rust by the waste and overflow
- Damage beneath the taps
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
Before you book anyone
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
How it works
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, tidy-up included.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Get a quote
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Sandy Lane, and we’ll reply with a fixed price.
Advice
What we cannot put right
We’ll always be straight with you, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
Looking after it afterwards
It’s all simple stuff:
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
A repaired bath needs no special treatment, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Sandy Lane. The price depends on:
- Whether we combine several jobs
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
We charge the same wherever you are, so there’s no premium for Sandy Lane. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- One picture of the whole bath
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
