Pembrokeshire · Wales

Bath chip & crack repair in Scoveston, Pembrokeshire

Bath repair for Scoveston, without a refit. Get a fixed price from your pictures, then book a visit.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Rust spots around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Scoveston homes

Scoveston questions

Do you charge for travel?

We don’t add a call-out fee. Your fixed quote includes everything.

What areas do you cover?

The whole UK, including all of Pembrokeshire. Just include your postcode and we’ll confirm dates.

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Something went through my bath. Can it be fixed?

Usually. Send us a picture of the hole and one from under the bath if you can.

Can you repair several things at once?

Of course, and it typically saves money. Send pictures of everything together and we will quote them together.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Can landlords book you?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Scoveston.

Bath repair in Scoveston, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. If you are dealing with damage done while the bathroom was being fitted and a failed DIY repair that’s discoloured or lifting, we can help, on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel alike.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Location
Scoveston (SA73)
Area hub
Pembrokeshire
Guarantee
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Acrylic cracks with no access behind them
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Wear across the whole surface, which needs re-enamelling

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we work on in Scoveston

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

Repairing versus replacing in Scoveston

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Scoveston. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Why book with us

  • Honest advice, even when it means no job
  • Colours mixed by hand to suit your surface
  • One-year guarantee on every repair
  • CHAS, Constructionline and SafeContractor accredited

See our full price list or bath cost comparison.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

What affects the price in Scoveston

Prices start from £95. We price every job individually, from your photos. What matters most is:

  • Doing more than one item at once
  • How many areas need work
  • How hard the colour is to match
  • Access to the area

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.

Send pictures for a quote

You can take the photos on your phone, there is no need for anything special. Just make sure we can see:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • Any earlier repairs or coatings
  • Where you are, by postcode

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.

What happens on the day

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, normally by the day after, the bath is ready to use.

How to prepare

  • Tell us if there are stairs or a lift
  • Point us to the nearest place to park
  • Move bottles, mats and clutter away from the area

Ask for a price

Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Scoveston, and we will come back with a fixed quote.

Get a free quote

Advice

Covering Scoveston

Scoveston is about 2 miles east of Milford Haven, in Pembrokeshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 223 places across Pembrokeshire, from the larger towns to small villages.

Our repair technicians cover all of the SA73 postcode area and the streets around it. We also cover the places around Scoveston: Waterston (1 mile south), Little Honeyborough (1 mile south-east), Mascle Bridge (1 mile south-east), Glenowen (1 mile south-east) and Rosemarket (1 mile north-east). Further out, we also cover Haverfordwest (5 miles north), Pembroke (5 miles south-east), Pembroke Dock (3 miles south-east), The Marsh (5 miles north), Dinbych-y-Pysgod (13 miles east) and The Green (12 miles east).

Around Scoveston

Typical jobs here are in homes near Milford Haven School and The Three Crowns pub, among other places. The closest station to Scoveston is Johnston station, roughly 2.2 miles north. A little further out are Pembroke Dock Heritage Centre (2.7 miles south-east) and Castle Pill (1.2 miles south-west). Not far away are East Moor and Hubberstown Pill.

Map of Scoveston © OpenStreetMap contributors

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Cover the bath during DIY or decorating
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Do not scrub with anything abrasive
  • Keep metal cans and razors off the surface

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.

Common problems we fix in Scoveston

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

People usually call us after spotting one of these:

  • Impact holes in acrylic
  • A chip where the taps sit
  • A kit repair that didn’t last
  • Rust by the waste and overflow

Questions to ask before booking

  • What protection goes down before work starts
  • When it can be used again
  • If travel is included in the price
  • A fixed price, and whether VAT is included

10 questions to ask before booking

Repairs by material

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.