Southampton · England

Bath & shower resealing (mastic) in Shirley, Southampton

Our repair technicians come to Shirley for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Water getting behind the bath or tray
  • Missing sealant behind the taps
  • Silicone coming away from the tiles
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Shirley?

Bath resealing in Shirley, done in place

Baths, trays, basins and kitchen worktops all get resealed using mould-resistant silicone. A typical reseal takes a couple of hours, then it needs to cure. If you are dealing with leaks at the edges and black mould in the sealant, we can help, whatever the material.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Where
Shirley (SO15, SO16, SO17)
Area hub
Southampton
Warranty
12 months on all our work
Quote
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Common problems we fix in Shirley

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

These are the problems we are asked about most:

  • Old sealant that looks dirty
  • Silicone smeared on tiles
  • Missing sealant behind the taps
  • Black spots in the silicone

What your quote should include

  • Aftercare advice
  • How soon you can use it again
  • How the room is protected while they work
  • What preparation is included

Our hiring checklist

Different materials, different repairs

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Where we work around Shirley

Shirley is about 2 miles west of Southampton, in Southampton. Our technicians come to homes and businesses in Shirley, so you don’t need to take anything anywhere. We work in 40 places across Southampton, from the larger towns to small villages. You can also see our page for London, about 70 miles away.

We work across SO15, SO16 and SO17 and the streets around it. You will find streets such as May Road, Dyer Road and York Road, all of which we cover. Shirley sits on or near the A3057, which makes travel easy. Neighbouring places we cover include Regents Park (1 mile west), Freemantle (1 mile south), Millbrook (1 mile south-west), Coxford (1 mile north-west) and Maybush (1 mile north-west). Within a short drive, we also cover Townhill Park (3 miles east), Midanbury (3 miles east), Thornhill (4 miles east), Chartwell Green (4 miles east), Harefield (4 miles east) and Itchen (3 miles south-east). Being one of Southampton’s larger places, Shirley is somewhere we visit often.

Local landmarks in Shirley

Our clients here include homes close to Millbrook Community School, St James' Park and Shirley Parish Church, among other places. Other local landmarks include Regents Park Community College (under half a mile west), The Crown Public House (within half a mile north-west) and Wordsworth Primary School (less than half a mile north). For rail, the closest station is Millbrook (Hants) station, about 0.7 miles south. Further afield, we also cover the area around Netley Castle (4.4 miles south-east) and Foresters Museum & Archive (1 mile south-east). Green spaces nearby include Testwood Lakes.

Map of Shirley © OpenStreetMap contributors

Your questions about bath resealing in Shirley

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does my sealant keep going mouldy?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

How long will it take?

Generally a couple of hours, then it needs to cure.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

How long does silicone take to cure?

Normally about a day later. We confirm before we leave.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Keeping it looking good

How the surface is treated afterwards matters:

  • Ventilate the bathroom well
  • Open a window after bathing
  • Dry the seal after bathing
  • Don’t stand toiletries on the seal

Keep the room well ventilated, and wipe the joints after use to keep mould away.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

The process

We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes about two hours for a bath, and the room is left clean and tidy.

  1. The old silicone is cut out completely.
  2. Residue is removed and the joint cleaned.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Get a fixed quote

Read more

Why reseal now?

Sealing over old silicone is a false economy. It soon peels, and traps mould underneath. We remove the old sealant completely. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why us?

  • CHAS and Constructionline accredited
  • Free fixed quotes from pictures
  • We will tell you if it’s not worth repairing
  • One-year guarantee on every repair

Take a look at our full price list.

What a repair can’t fix

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Movement in the bath or tray
  • Hidden water damage
  • Loose tiles, which need refixing first

Send us photos and we’ll tell you honestly.

Materials we repair

  • Shower trays & enclosures
  • Kitchen worktops & sinks
  • Baths
  • Basins & vanity units
  • Wet rooms

Can I fix it myself?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Landlord and trade work in Shirley

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.