East Riding of Yorkshire · England

Bath Repair for Skipsea homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Skipsea, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A kit repair that didn’t last
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Skipsea

Bath repair in Skipsea, done in place

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for scuffs and scratches in the surface and impact holes in acrylic, on cast iron enamel, roll-top & freestanding and pressed steel enamel.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Bath enamel chip by the waste, filled and colour matched (before and after)
Where
Skipsea (YO25)
Region
East Riding of Yorkshire
Cover
A year, on every repair
Quote
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Covering Skipsea

Skipsea is about 8 miles south of Bridlington, in East Riding of Yorkshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Skipsea is one of 299 places in East Riding of Yorkshire where we work. We work right across the region, from Skipsea to Leeds (55 miles away).

Our repair technicians cover all of the YO25 postcode area and the streets around it. From Main Street, Town Farm Close and Cross Street or anywhere nearby, a technician can come to you. If you are just outside Skipsea, we cover Skipsea Brough (1 mile south-west), Dringhoe (1 mile west), Ulrome (1 mile north), Beeford (3 miles west) and Bewholme (3 miles south). Within a short drive, we also cover Beverley (13 miles south-west), Bridlington (8 miles north), Driffield (9 miles west), Hornsea (5 miles south-east), Hilderthorpe (7 miles north) and Flamborough (10 miles north).

Landmarks near Skipsea

Our clients here include homes close to Board Inn, Skipsea Primary School and Church of All Saints, among other places. Further afield, we also cover the area around Hornsea Cottage Hospital (4.8 miles south-east).

Map of Skipsea © OpenStreetMap contributors

When a repair is not the answer

Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Flexing caused by a failed cradle or loose feet
  • Rust that has eaten right through a steel bath

Not sure? Send photos and we’ll give you a straight answer before booking.

Materials we repair

  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why us?

  • Everything repaired in place
  • Straight answers about what a repair can do
  • Every repair guaranteed for a year
  • No extra charge for your area

See our prices page and bath cost comparison.

What happens on the day

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

How to prepare

  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area

How to get a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

Get a free quote

Read more

How we price bath repair

Repairs from £95. There’s no charge for travel to Skipsea. The price depends on:

  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • Where the damage is and how we get to it

The price reflects the work involved, not where you live. You’ll see the full price before you book, with nothing added on the day.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection
  • One picture of the entire bath
  • Your postcode, so we can check dates

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Questions from Skipsea

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.

What information do you need?

Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.

Can you repair several things at once?

Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

How long does the repair take to cure?

Typically the day after. We confirm the time before we leave.

Do you cover Skipsea?

Yes. We cover the whole UK and come to Skipsea and the rest of East Riding of Yorkshire. Send pictures and we will quote, or call 0345 017 0787.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Will I be able to see the repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Rinse it down after each bath
  • Do not scrub with anything abrasive
  • Check that an acrylic bath does not move when you stand in it
  • Fix dripping taps early to stop staining and limescale

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

For landlords and businesses

If you manage property in Skipsea, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

Landlords, letting agents and housing providers in Skipsea use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.