Kent · England
Bath Repair in Smarden
We travel to Smarden for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides
Bath repair in Smarden, done in place
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We’re often asked to fix chips along the edge of the bath and scuffs and scratches in the surface, on pressed steel enamel, acrylic and roll-top & freestanding.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Smarden (TN27)
- Region
- Kent
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Smarden
Smarden is about 8 miles west of Ashford, in Kent. Across the TN27 area, we come to you. Smarden is one of 922 towns and villages in Kent where we work. Our nearest city page is London, about 42 miles away.
Jobs in TN27 work the same way as everywhere else we cover. You will find streets such as The Street, The Acorns and Water Lane. Close by, we cover Biddenden Green (1 mile north-east), Smarden Bell (1 mile north-west), Monk's Hill (1 mile south-west), Swift's Green (1 mile north-west) and Standen (2 miles south-west). Further out, we also cover Maidstone (11 miles north-west), Ashford (8 miles east), Sittingbourne (13 miles north), Faversham (14 miles north-east), Kings Hill (15 miles north-west) and Davington (14 miles north-east).
Near you in Smarden
Typical jobs here are in homes near Smarden Primary School, Church of St Michael and The Chequers Inn and the streets around them. Smarden’s nearest station is Pluckley station, roughly 2.6 miles east of the centre. Nearby you will also find Romden Castle (1 mile east) and Benenden Hospital (5.3 miles south-west).
What a repair can’t fix
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Places near Smarden
More services for Smarden
FAQs for Smarden
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
How long does the repair take to cure?
Most baths can be used the next day. We’ll tell you the exact curing time when we finish.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we’ll quote them together.
Do you cover Smarden?
Yes, we do. Repair technicians travel to Smarden from across the region, and the price is the same as everywhere else.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we will ask for another angle.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
How the visit works
Your technician turns up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and we leave the room as we found it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
Getting a price
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
Repairing versus replacing in Smarden
Swapping a damaged bath for a new one typically means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Smarden. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Smarden
- No need to remove anything
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Free fixed quotes from pictures
Take a look at our full price list and resurfacing vs replacement cost guide.
Common problems we fix in Smarden
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
It’s worth getting a quote if you see:
- A kit repair that didn’t last
- Chips caused by builders
- Impact holes in acrylic
- Cracks in an acrylic bath
Questions to ask before booking
- Whether they match the colour on site
- Aftercare advice
- If travel is included in the price
- What the guarantee covers, and for how long
Landlords, agents and businesses in Smarden
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
For anyone letting property in or around Smarden, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
What bath repair costs
Prices start from £95. We don’t charge extra for travel to Smarden. The price depends on:
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- Whether we combine several jobs
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Two or three clear photos are usually enough. Try to include:
- Any details about the material
- Details of any past repairs
- Where you are, by postcode
- Something in shot to show the size
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Aftercare tips
Simple care helps the repair last. We recommend:
- Do not scrub with anything abrasive
- Give the bath a quick rinse after use
- Check that an acrylic bath does not move when you stand in it
- Put a towel in the bath if you’re working above it
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
