Shropshire · England
Bath Repair for Somerwood homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Somerwood, with a one-year guarantee on every repair.
- Repairs from £95
- Impact holes in acrylic
- Hairline or through cracks in acrylic
About our bath repair in Somerwood
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and common reasons people contact us are a failed DIY repair that’s discoloured or lifting and hairline or through cracks in acrylic.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Somerwood (SY4)
- Region
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. We price every job individually. The main factors are:
- What kind of damage it is
- Unusual colours or finishes
- How easy the damage is to reach
- The material
Our prices are the same across the UK, so there’s no premium for Somerwood. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Any details about the material
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Most clients in Somerwood get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
About Somerwood
Somerwood is about 5 miles east of Shrewsbury, in Shropshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Somerwood is one of 433 towns and villages in Shropshire we cover. Our nearest city page is Birmingham, about 36 miles away.
We work across SY4 and the streets around it. We also travel to Rodington Heath (1 mile east), Rodington (1 mile east), Withington (1 mile south), Roden (1 mile north) and Upton Magna (2 miles south-west). We also work in nearby towns such as Shrewsbury (5 miles west), Madeley (10 miles south-east), Market Drayton (14 miles north-east), Coleham (5 miles west), Kingsland (5 miles west) and Belle Vue (5 miles west).
Around Somerwood
In Somerwood, that means homes near Church of St George, among other places. The nearest railway station is Shrewsbury station, about 4.9 miles west. Other landmarks nearby include Princess Royal Hospital (5.3 miles east) and Wroxeter Roman Site And Museum (3.8 miles south). Not far away are Haughmond Hill.
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Somerwood use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Repair or replace: which is better?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- A year’s guarantee on all work
See our prices page and bath cost comparison.
Places near Somerwood
Other services in Somerwood
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- Don’t leave razors or cans standing in the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Ensure the area is dry
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Read more
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Honest limits
It helps to know what we can’t do:
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Somerwood
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Somerwood questions
What happens after I send pictures?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
How much does bath repair cost in Somerwood?
Repairs from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your SY4 postcode.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
