Liverpool · England
Bath chip & crack repair in Speke, Liverpool
Chip and crack repairs to enamel, acrylic and cast iron baths in Speke, carried out at your home and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- Rust spots around the plughole
Bath repair at your home in Speke
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Typical jobs include scratches you can feel with a fingernail and a hole punched through by something heavy, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Big or small, you get the same one-year guarantee.
- Location
- Speke (L24)
- County
- Liverpool
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Speke
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Which areas do you work in?
Everywhere in the UK, Speke included. There is no extra charge for travel.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Repair or replace: which is better?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.
What you get with us
- Repair technicians who travel to you, UK-wide
- Nothing taken out or refitted
- CHAS and Constructionline accredited
- We’ll tell you if it’s not worth repairing
Take a look at our prices page and bath cost comparison.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Landlord and trade work in Speke
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Speke and nearby
Speke is about 2 miles south-east of Woolton, in Liverpool. Wherever you are in the L24 postcode area, we come to you. Speke is one of 52 towns and villages in Liverpool where we work. You can also see our page for Liverpool, about 6 miles away.
Our technicians cover all of the L24 postcode area and the streets around it. Jobs here include addresses on Hale Road, Lovel Road and Linner Road. Neighbouring places we cover include Oglet (1 mile south), Halewood (1 mile north), Hunt's Cross (1 mile north), Garston (2 miles west) and Woolton (2 miles north-west). We also work in nearby towns such as Liverpool (6 miles north-west), Crosby (13 miles north-west), Everton (7 miles north-west), Orrell (11 miles north-west), Brighton-le-Sands (13 miles north-west) and Wavertree (5 miles north-west).
Near you in Speke
We visit homes around St Aidan's, Middlefield Community Primary School and Dove and Olive Branch pub, among other places. Speke’s nearest station is Hunts Cross station, roughly 1.5 miles north-west of the centre. A little further out are Broadgreen Hospital (5.4 miles north-west) and New Mersey Shopping Park (1.7 miles north-west). For a walk, there is Speke and Garston Coastal Reserve.
- Parks and local facilities nearby include Allerton and Hunts Cross (1.8 miles north-west)
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- Unusual colours or finishes
- How many areas need work
- The type of damage
- The material and finish
Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Two or three clear photos are usually enough. Try to include:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- A picture taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
More services for Speke
Do you need bath repair in Speke?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
If you can see any of these, send us a photo:
- Deep scratches in acrylic
- Chips under the taps
- Hairline or through cracks in acrylic
- Impact holes in acrylic
What to look for in a quote
- How the room is protected while they work
- Who turns up on the day
- How to look after the finish
- How soon you can use it again
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes two to three hours for most chips, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Point us to the nearest place to park
- Ensure the room can be ventilated
- Clear the area around the damage
Get a quote
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
