Liverpool · England
Bath Repair in Halewood
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Halewood. Free, fixed quotes from your photos.
- Repairs from £95
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
Common problems we fix in Halewood
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
These are the problems we’re asked about most:
- Chips caused by builders
- Deep scratches in acrylic
- Chips along the edge of the bath
- Chips under the taps
What your quote should include
- How your room will be protected
- How long it needs to cure
- How changes to the job are handled
- Whether the price covers travel
Bath repair in Halewood without replacing anything
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. There’s no need to book a plumber or tiler, because the bath doesn’t move. We work on pressed steel enamel, acrylic and cast iron enamel, and people most frequently call us about chips caused by builders and holes from dropped items.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Halewood (L26, L25, L24)
- Region
- Liverpool
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Halewood
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
More services for Halewood
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
What affects the price in Halewood
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Whether we combine several jobs
- The type of damage
- How hard the colour is to match
- How easy the damage is to reach
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Details of any past repairs
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We clean up when we are done and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
How to get a price
For a price in Halewood, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Where we work around Halewood
Halewood is about 3 miles south of Huyton, in Liverpool. Wherever you are in the L26 postcode area, we come to you. Halewood is one of 52 towns and villages in Liverpool we cover.
Every address in L26, L25 and L24 is within our area, from the main roads to the quietest streets. Whether you live on Wood Road, Tudor Road and The Avenue or anywhere nearby, we can come to you. We also cover the places around Halewood: Hunt's Cross (1 mile west), Speke (1 mile south), Woolton (1 mile north-west), Gateacre (2 miles north-west) and Netherley (2 miles north). Further out, we also cover Liverpool (5 miles north-west), Crosby (12 miles north-west), Everton (7 miles north-west), Orrell (10 miles north-west), Brighton-le-Sands (12 miles north-west) and Wavertree (5 miles north-west).
Around Halewood
We visit homes around St Mary's Church, Halewood Academy and Yew Tree Primary Academy. Other local landmarks include The Dales pub (0.6 miles north) and Woolton Wood and Camp Hill (1.4 miles north-west). For rail, the closest station is Halewood station, about 0.5 miles north-east. A little further out are Allerton and Hunts Cross (1.5 miles west) and Broadgreen Hospital (4.3 miles north-west). Not far away are Speke and Garston Coastal Reserve and Princes Park lake.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Looking after it afterwards
To keep it looking its best for years:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
- Make sure an acrylic bath is firm underfoot
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Halewood questions
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Do you work in Halewood?
We do. Technicians travel to Halewood from across the region, and the price is the same as everywhere else.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is there any odour?
Expect a mild smell while we’re working that clears as it cures.
About our accreditations · Every repair comes with a one-year guarantee.
