Derbyshire · England

Bath chip & crack repair in Spital, Derbyshire

Bath repair in Spital without the cost of replacing. Send us photos for a fixed price, then book a visit.

  • Repairs from £95
  • Chips caused by builders
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Spital

Spital: your questions answered

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

Is my repair covered?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Can a cracked acrylic bath be fixed?

In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

Can you quote from photos?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

Does someone need to be in?

We need someone to let us in. You do not need to watch us work.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Bath repair in Spital without replacing anything

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, the tiles aren’t touched, and the finish is matched to the rest of the bath. We regularly repair acrylic, cast iron enamel and roll-top & freestanding, and people most frequently call us about rusty patches near the plughole and a cracked acrylic bath.

You get a one-year guarantee, the same in Spital as everywhere else we work.

Location
Spital (S41, S40, S44)
County
Derbyshire
Warranty
One year on every repair
Price
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Looking after it afterwards

To keep it looking its best:

  • Check that an acrylic bath doesn’t move when you stand in it
  • Give the bath a quick rinse after use
  • Do not leave a fresh chip for long
  • Stick to mild cleaners and a soft cloth

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Preparing for the visit

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Mention any earlier repairs or resurfacing

How to get a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a fixed price

Read more

Landlords, agents and businesses in Spital

If you manage property in Spital, we will quote for several properties at once. Send pictures for each one and we’ll price them together.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Covering Spital

Spital is about 1 mile south-east of Chesterfield, in Derbyshire. Wherever you are in the S41 postcode area, a technician comes to you. Spital is one of 532 towns and villages in Derbyshire we cover. You can also see our page for Manchester, about 37 miles away.

Our visits in S41, S40 and S44 work the same way as everywhere else we cover. Whether you live on Avenue 2, Avenue 3 and Avenue 4 or anywhere nearby, we can come to you. With the A617 and A632 close by, Spital is easy for our repair technicians to reach. Nearby, we also work in Hasland (1 mile south-east), Birdholme (1 mile south-west), Boythorpe (1 mile west), Chesterfield (1 mile north-west) and Tapton (1 mile north). Larger places within reach include Belper (14 miles south), Heanor (15 miles south), Dronfield (6 miles north-west), Ripley (13 miles south), Bolsover (5 miles east) and Staveley (3 miles north-east).

Landmarks near Spital

Locally, our jobs take us to homes close to The Spital pub, St Leonard's and Hady Primary School and the streets around them. Other local landmarks include Hasland Hall Community School (0.8 miles south-east) and Chesterfield St Helena School (0.9 miles north-west). The closest station to Spital is Chesterfield station, roughly 0.7 miles north of the centre. Well-known places in the area include Chesterfield Royal Hospital (0.9 miles north-east) and Bolsover Castle (4.9 miles east).

  • Local facilities include Municipal Borough of Chesterfield (less than half a mile north)
Map of Spital © OpenStreetMap contributors

Common problems we fix in Spital

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.

The things customers normally mention when they call are:

  • A failed DIY repair that is discoloured or lifting
  • Chips on the rim or sides
  • Hairline or through cracks in acrylic
  • Snagging damage from a refit

What your quote should include

  • Who turns up on the day
  • A fixed quote, and whether VAT is included
  • What happens if they find more damage
  • How long the guarantee is and what it covers

How to compare quotes

What affects the price in Spital

Prices start from £95. You’ll know the full cost before booking. We take into account:

  • Whether we combine several jobs
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Getting a price from photos

Before you send photos, a few simple things make all the difference:

  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • Any details about the material
  • Details of any past repairs

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

When a repair isn’t the answer

A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Wear across the entire surface, which needs re-enamelling
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer before you book.

Surfaces we repair

  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.