Cornwall · England
Bath Repair in Trevanson
Fixed-price bath repair in Trevanson and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Chips caused by builders
About Trevanson
Trevanson is about 7 miles north-west of Bodmin, in Cornwall. Our technicians come to homes and businesses in Trevanson and the surrounding area, so nothing has to leave your home. We work in all 644 towns and villages in Cornwall, from the larger towns to small villages.
Our visits in PL27 are booked in the same way as anywhere else. Jobs here include addresses on Rowan Road, Trevanson Road and Talmena Avenue and the roads around them. You’ll find Trevanson on the A39, so it’s easy for us to reach. Other places close to Trevanson include Dunveth (1 mile south-east), Burniere (1 mile north-east), Wadebridge (1 mile east), Bodieve (1 mile north-east) and Egloshayle (1 mile east). Further out, we also cover Newquay (12 miles south-west), St Austell (13 miles south), Bodmin (7 miles south-east), Sandy Bottom (13 miles south), Bethel (13 miles south) and Nansledan (11 miles south-west).
What’s near Trevanson
We visit homes around Wadebridge School, Church of St Breock and St Breock Primary School and the streets around them. A little further out are Shipwreck Museum (3.9 miles west) and Doyden Castle (4.9 miles north). Green spaces nearby include St Breock Downs.
- Parks and local facilities nearby include North Cornwall (0.8 miles east)
Bath repair in Trevanson without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. You can normally use the bath the following day. Whether it’s chips on the rim or sides and deep scratches in acrylic, we can normally put it right.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Trevanson (PL27)
- Area hub
- Cornwall
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Also near Trevanson
Other services in Trevanson
Questions from Trevanson
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Prices and what affects them
Prices start from £95. Prices are worked out job by job. What matters most is:
- Access to the area
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- The type of damage
We charge the same wherever you are, with no extra for Trevanson. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Details of any past repairs
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Make sure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
A repaired bath needs no special treatment. Skip bleach and gritty creams and give it a rinse after each bath.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Signs you need bath repair in Trevanson
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
People generally call us after spotting one of these:
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Scuffs and scratches in the surface
- A chipped rim or side
What to look for in a quote
- How your room will be protected
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- How the colour is matched
How the visit works
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Point us to the nearest place to park
- Make sure the area is dry
- Have a window or extractor fan available
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We will say immediately whether it can be repaired.
Advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Trevanson as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
