Derbyshire · England
Bath chip & crack repair in Staden, Derbyshire
Problem with your bath in Staden? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- Scratches you can feel with a fingernail

DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Bath repair in Staden without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, pressed steel enamel and cast iron enamel, and people most often call us about rusty patches near the plughole and scratches you can feel with a fingernail.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Staden (SK17)
- County
- Derbyshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Common questions in Staden
Are there extra charges for Staden?
There’s no separate call-out charge. Your fixed quote includes everything.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Which areas do you work in?
The whole UK, including all of Derbyshire. Just include your postcode and we will offer you dates.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is a cracked acrylic bath repairable?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Landlord and trade work in Staden
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Staden clients choose us
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- Same prices wherever you are
Read our full price list and resurfacing vs replacement cost guide.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say immediately if a repair is the right fix.
Related advice
What we are called out for in Staden
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Customers typically contact us about:
- Chips caused by builders
- Deep scratches in acrylic
- A cracked acrylic bath
- Rust spots around the plughole
Questions to ask before you book
- What protection goes down before work starts
- How the colour is matched
- What prep work is covered
- Whether a trained technician does the job
Our work in Staden
Staden is about 1 mile north-east of Buxton, in Derbyshire. Whether you’re in the middle of Staden or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Staden is one of 532 places in Derbyshire where we work. We work right across the region, from Staden to Manchester (20 miles away).
Here we cover the SK17 postcode area. Whether you live on Dale Lane, Bench Road and King's Road or a nearby road, we can come to you. We also cover the places around Staden: Batham Gate (2 miles north), Harpur Hill (2 miles south), Upper End (2 miles north-east), Peak Dale (2 miles north-east) and Smalldale (3 miles north-east). Further out, we also cover Glossop (13 miles north), New Mills (9 miles north-west), Hadfield (14 miles north), Chapel-en-le-Frith (4 miles north), Bakewell (10 miles east) and Darley Dale (14 miles south-east).
What’s near Staden
Typical jobs here are in homes near Church of St Peter, Fairfield Endowed CofE (C) Junior School and Buxton Pavilion Gardens. Nearby too are The 19th Hole pub (less than half a mile north), St Thomas More Catholic Voluntary Academy (0.8 miles west) and St Thomas More Catholic School (0.7 miles west). The nearest railway station is Buxton station, roughly 0.7 miles west. Other landmarks nearby include Municipal Borough of Buxton (0.6 miles west) and Buxton Motor Museum (0.6 miles west). Not far away are Corbar Hill and Harpur Hill Quarry.
Places near Staden
What else we do in Staden
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- How many items we do on one visit
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.

