Derbyshire · England

Bath chip & crack repair in Upper End, Derbyshire

Bath repair across Upper End and nearby, done in a single visit in most cases.

  • Repairs from £95
  • Rust by the waste and overflow
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Upper End

Bath repair in Upper End, done in place

Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Typical jobs include rust by the waste and overflow and holes from dropped items, on whirlpool & spa baths, roll-top & freestanding and acrylic.

A one-year guarantee comes as standard, so you are not left on your own once we have gone.

Where
Upper End (SK17)
Region
Derbyshire
Guarantee
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

How we price bath repair

Repairs from £95. We price every job individually. What matters most is:

  • What the surface is made of
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out

Our prices are the same across the UK, with no extra for Upper End. What changes the price is the job itself: the material, the amount of damage and how many items.

Quotes from your photos

Most quotes are done from photos alone. To make it quick:

  • Your postcode, so we can check dates
  • What it’s made of, if you know
  • A wider photo showing the entire bath
  • One sharp close-up of the damage

Send us a photo of the damage and one of the whole item, and tell us you’re in Upper End, and we’ll come back with a fixed quote.

Upper End and the surrounding area

Upper End is about 3 miles north-east of Buxton, in Derbyshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Upper End is one of 532 towns and villages in Derbyshire where we work. We work right across the region, from Upper End to Manchester (20 miles away).

Jobs in SK17 are booked in the same way as anywhere else. Jobs here include addresses on Upper End Road, Ferndale Road and New Street and the roads around them. Neighbouring places we cover include Peak Dale (1 mile north-west), Batham Gate (1 mile west), Smalldale (1 mile north), Staden (2 miles south-west) and Harpur Hill (4 miles south). Within a short drive, we also cover Buxton (3 miles south-west), Glossop (12 miles north), New Mills (8 miles north-west), Hadfield (13 miles north), Chapel-en-le-Frith (3 miles north-west) and Bakewell (9 miles south-east).

Around Upper End

In Upper End, that means homes near Peak Dale Primary School and St Thomas More Catholic Voluntary Academy, among other places. Upper End’s nearest station is Dove Holes station, about 1.6 miles north-west of the centre. Other landmarks nearby include Buxton Motor Museum (2.3 miles south-west) and Devonshire Royal Hospital (2.6 miles south-west). Open spaces near Upper End include Corbar Hill and Harpur Hill Quarry.

  • Local facilities include Municipal Borough of Buxton (2.4 miles south-west)
Map of Upper End © OpenStreetMap contributors

Keeping it looking good

Nothing complicated is needed:

  • Have new chips seen to early
  • Rinse the bath after use, especially in hard water areas
  • A dripping tap stains enamel, so fix it early
  • Check that an acrylic bath does not move when you stand in it

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

Should I try a DIY kit first?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Your questions about bath repair in Upper End

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

I tried a repair kit. Can you fix it?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

How long before I can use the bath?

Most baths can be used the next day. We will tell you the exact curing time when we finish.

Is a repair better than a new one?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

What areas do you cover?

Everywhere in the UK, Upper End included. There is no extra charge for travel.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

What happens next?

We come back with a fixed quote, typically with dates to choose from. There’s no obligation to book.

Can pets and children be at home?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Repair or replace: which is better?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Why book with us

  • Straight answers about what a repair can do
  • One-year guarantee on every repair
  • No extra charge for your area
  • We leave the room as we found it

Read our pricing and resurfacing vs replacement cost guide.

When a repair isn’t the answer

A repair isn’t always the answer, and we’d rather say so up front. We can’t fix:

  • A bath worn all over, where resurfacing makes more sense
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A steel bath rusted through

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Pressed steel enamel

How it works

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a few hours, and we will keep you posted as we go.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Make sure the room can be ventilated
  • Keep a parking space free if you can

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

Send photos for a quote

Related advice

For landlords and businesses

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

For anyone letting property in or around Upper End, we will quote for several properties at once. Send photos for each one and we’ll price them together.

Signs you need bath repair in Upper End

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

These are the problems we are asked about most:

  • Rust by the waste and overflow
  • A failed DIY repair that is discoloured or lifting
  • Cracks in an acrylic bath
  • Chips caused by builders

Comparing quotes

  • Whether the price covers travel
  • What aftercare is recommended
  • What protection goes down before work starts
  • How changes to the job are handled

How to compare quotes

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.