Blackpool · England
Bath Repair for Staining homes
Problem with your bath in Staining? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps
Repair or replace: which is better?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- Technicians who travel to you, UK-wide
Read our pricing and bath cost comparison.
Bath repair in Staining without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Typical jobs include hairline or through cracks in acrylic and rust by the waste and overflow, on pressed steel enamel, cast iron enamel and whirlpool & spa baths.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Staining (FY3)
- County
- Blackpool
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What we’re called out for in Staining
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
People usually call us after spotting one of these:
- A failed DIY repair that’s discoloured or lifting
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Damage beneath the taps
Comparing quotes
- How changes to the job are handled
- The length of the guarantee and what it covers
- Whether cleaning and preparation are in the price
- Is the price fixed, and does it include VAT?
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
Advice
Honest limits
A few problems are outside what a surface repair can do:
- Rust that has eaten right through a steel bath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Staining
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Your questions about bath repair in Staining
How long before I can use the bath?
Generally the next day. We confirm the time before we leave.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How much does bath repair cost in Staining?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Which areas do you work in?
All of Blackpool, and the rest of the UK. Travel is included in the price.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Nearby places to Staining
Also in Staining
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The material and finish
- What kind of damage it is
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- Details of any past repairs
- A close-up of the damage, in focus
- A photo taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Our work in Staining
Staining is about 2 miles east of Blackpool, in Blackpool. We visit homes and businesses in Staining and the surrounding area, so nothing has to leave your home. We work in 12 places across Blackpool. You can also see our page for Liverpool, about 29 miles away.
Every address in FY3 is covered. Local streets include Meadow Park, Summerville Avenue and Queens Drive, all of which we cover. Other places close to Staining include Mythop (1 mile south-east), Poulton-le-Fylde (2 miles north), Weeton (2 miles east), Singleton (3 miles north-east) and Little Singleton (3 miles north-east). Within a short drive, we also cover Squires Gate (3 miles south-west), Starr Gate (4 miles south-west), South Shore (3 miles south-west) and North Shore (3 miles west).
Landmarks near Staining
Typical jobs here are in homes near Stanley Park, Church of St Luke and Baines School. The nearest railway station is Layton station, about 2.1 miles north-west of the centre. Nearby you’ll also find Showtime (2.7 miles west) and Teanlowe Centre (2 miles north). Not far away are Marton Mere.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
