Leeds · England
Bath chip & crack repair in Stanley, Leeds
Local bath repair for Stanley: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- A chip where the taps sit
Bath repair in Stanley, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, usually in a single visit. Typical jobs include an old repair that has yellowed or come loose and rust spots around the plughole, on roll-top & freestanding, acrylic and cast iron enamel.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Stanley (WF3, WF1)
- Region
- Leeds
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
If you manage property in Stanley, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
Stanley and nearby
Stanley is about 2 miles north-east of Wakefield, in Leeds. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 198 towns and villages in Leeds, from the larger towns to small villages. You can also see our page for Leeds, about 7 miles away.
All of WF3 and WF1 is covered. Jobs here include addresses on Moor Road, Oak Avenue and Mount Road and the roads around them. Close by, we cover Bottom Boat (1 mile north-east), Lofthouse Gate (1 mile west), Stanley Ferry (1 mile south-east), Lofthouse (1 mile north-west) and Royds Green (1 mile north). Further out, we also cover Leeds (7 miles north-west), Morley (5 miles north-west), Pudsey (10 miles north-west), Rothwell (3 miles north), Beeston (5 miles north-west) and Farsley (10 miles north-west).
Near you in Stanley
In Stanley, that means homes near Stanley Methodist Church, The Rodillian Academy and Stanley Grove Primary and Nursery School. For rail, the closest station is Outwood station, roughly 1.4 miles west. Further afield, we also cover the area around Rothwell Castle (2.5 miles north) and Trinity Walk (2.2 miles south). Open spaces near Stanley include Lemonroyd Lake and Jaw Hill.
Should you replace it?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- Most jobs done in one visit
- Work done at your home or business
Take a look at our pricing and resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
What bath repair costs
Prices start from £95. You will know the full cost before booking. We take into account:
- The material
- Previous DIY repairs that have to come out
- The colour and finish to match
- How easy the damage is to reach
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
It only takes a minute to photograph the damage. Try to send:
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
Most customers in Stanley get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Common problems we fix in Stanley
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Common reasons people in Stanley contact us are:
- Rust by the waste and overflow
- Snagging damage from a refit
- A chipped rim or side
- Holes from dropped items
Questions to ask before booking
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
- How the colour is matched
- Whether cleaning and preparation are in the price
When we’d advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We can’t fix:
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Questions from Stanley
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
More services for Stanley
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Have a window or extractor fan available
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
