Staffordshire · England
Bath Repair for Stanley Moss homes
Our repair technicians come to Stanley Moss for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Rusty patches near the plughole
- A hole punched through by something heavy
How we handle bath repair in Stanley Moss
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s an old repair that has yellowed or come loose and rust spots around the plughole, we can help.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Where
- Stanley Moss (ST9)
- Region
- Staffordshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Stanley Moss
Stanley Moss is about 4 miles south-east of Biddulph, in Staffordshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Stanley Moss is one of 512 places in Staffordshire where we work. Our nearest city page is Manchester, about 29 miles away.
All of ST9 is covered. We also cover the places around Stanley Moss: Stanley Moor (1 mile south), Stanley (1 mile east), Endon (1 mile north), Stockton Brook (1 mile west) and Bagnall (1 mile south). We also work in nearby towns such as Newcastle-under-Lyme (6 miles south-west), Longton (6 miles south), Stone (12 miles south), Leek (4 miles north-east), Biddulph (4 miles north-west) and Alsager (8 miles west).
Local landmarks in Stanley Moss
Around Stanley Moss, we work in homes near St Luke's CofE Academy Endon, Endon High School and Stafford Arms Public House And St Chad's House and the streets around them. The nearest railway station is Longport station, about 4.7 miles south-west of the centre. Other landmarks nearby include Nursing History Museum (3.1 miles east) and St Edward's Hospital (3.2 miles east). For a walk, there is Westport Lake and Coombes Valley RSPB reserve.
- Local facilities include Abbey Green (2 miles south-west)
Also near Stanley Moss
Also in Stanley Moss
How to care for the repair
Looking after the surface is easy:
- Don’t leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Landlords, agents and businesses in Stanley Moss
If you manage property in Stanley Moss, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Make sure the area is dry
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Advice
Signs you need bath repair in Stanley Moss
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Send us a photo if you notice any of these:
- Damage beneath the taps
- Snagging damage from a refit
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
Comparing quotes
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- Who will actually do the work
- What aftercare is recommended
What we can’t put right
In fairness, some problems need a different fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
Questions from Stanley Moss
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Staffordshire.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Something went through my bath. Can it be fixed?
Typically. Send us a picture of the hole and one from under the bath if you can.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
How long does the repair take to cure?
Typically the next day. We confirm the time before we leave.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- Straight answers about what a repair can do
- Work done at your home or business
- One price list for the entire UK
- Free fixed quotes from pictures
Take a look at our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
