Bath and North East Somerset · England
Bath chip & crack repair in Stock, Bath and North East Somerset
Problem with your bath in Stock? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A chip where the taps sit
- Chips caused by builders
How we handle bath repair in Stock
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. Whether it’s rust spots around the plughole and chips caused by builders, we can normally put it right, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Stock (BS40)
- County
- Bath and North East Somerset
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the following day, the bath is ready to use.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
- Let us know if it has been repaired before
Ask for a price
To get a price, send a couple of photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Advice
Also in Stock
Common problems we fix in Stock
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Most people get in touch when they notice something like this:
- Rusty patches near the plughole
- Chips on the rim or sides
- A cracked acrylic bath
- Snagging damage from a refit
Before you book anyone
- Whether they match the colour on site
- Who turns up on the day
- What protection goes down before work starts
- How to look after the finish
What we cannot put right
To be straight with you, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Repair or replace in Stock?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- CHAS and Constructionline accredited
- Typically one visit, start to finish
- A year’s guarantee on all work
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
Landlord and trade work in Stock
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Covering Stock
Stock is about 5 miles south of Nailsea, in Bath and North East Somerset. Wherever you are in the BS40 postcode area, we carry out the work at your property. Stock is one of 136 places in Bath and North East Somerset where we work.
We cover every part of the BS40 postcode area and the streets around it. Jobs here include addresses on Stock Lane and Duck Lane. Neighbouring places we cover include Blackmoor (1 mile south-east), Iwood (1 mile north), Lower Langford (1 mile south-east), Churchill (1 mile south) and Udley (1 mile north). We also work in nearby towns such as Keynsham (13 miles east), Paulton (13 miles east), Saltford (14 miles east), Timsbury (13 miles east), High Littleton (12 miles east) and Clutton (11 miles east).
What’s near Stock
We visit homes around Churchill Academy & Sixth Form, Stag & Hounds pub and St Mary's Church. For rail, the closest station is Yatton station, about 3.3 miles north-west. Nearby you’ll also find Banwell Museum (3.8 miles south-west) and Banwell Castle (3.6 miles south-west). Green spaces nearby include Cadbury Hill and Kingswood.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Stock: your questions answered
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can pets and children be at home?
Keep pets and children away from the work area on the day.
Do you cover Stock?
Yes. We cover the whole UK and come to Stock and the rest of Bath and North East Somerset. Send pictures and we will quote, or call 0345 017 0787.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What bath repair costs
Prices start from £95. There is no charge for travel to Stock. The price depends on:
- The type of damage
- How hard the colour is to match
- What the surface is made of
- How easy the damage is to reach
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Send pictures for a quote
You can typically get a fixed quote without us visiting. To make it quick:
- A close-up of the damage, in focus
- One picture of the entire bath
- Details of any past repairs
- Any details about the material
Upload pictures of the damage and one of the entire item, with your BS40 postcode, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
