North Somerset · England

Bath chip & crack repair in Churchill, North Somerset

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Churchill, with a one-year guarantee on every repair.

  • Repairs from £95
  • A chip where the taps sit
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Churchill

Bath repair in Churchill without replacing anything

Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include a failed DIY repair that’s discoloured or lifting and snagging damage from a refit, across whirlpool & spa baths, cast iron enamel and pressed steel enamel.

Every repair comes with our one-year guarantee, wherever you are in North Somerset.

Where
Churchill (BS25, BS40)
Area hub
North Somerset
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Signs you need bath repair in Churchill

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.

Look out for any of the following:

  • Rust spots around the plughole
  • A hole punched through by something heavy
  • A kit repair that didn’t last
  • Damage done while the bathroom was being fitted

Comparing quotes

  • A fixed quote, and whether VAT is included
  • How long the guarantee is and what it covers
  • Who will actually do the work
  • Aftercare advice

How to compare quotes

Prices and what affects them

Prices start from £95. You’ll know the full cost before booking. We look at:

  • How many items we do on one visit
  • The type of damage
  • The size and number of damaged areas
  • The colour and finish to match

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send photos for a quote

Before you send photos, a few simple things make all the difference:

  • Daylight if possible, and no flash reflection
  • Something in shot to show the size
  • A photo taken from further back
  • Details of any past repairs

The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly whether it can be repaired.

Your questions about bath repair in Churchill

Can you quote from pictures?

Generally, yes. Clear photos let us give you a fixed price without visiting.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you cover the whole of North Somerset?

The whole UK, including all of North Somerset. Just include your postcode and we’ll offer you dates.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Do you cover Churchill?

Yes, we do. Repair technicians travel to Churchill from across the region, with no extra charge for travel.

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

How invisible is a bath repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.

Churchill and nearby

Churchill is about 7 miles south of Nailsea, in North Somerset. Across the BS25 area, a technician comes to you. We cover all 86 towns and villages in North Somerset, from the larger towns to small villages.

Here we cover the BS25 and BS40 postcode area. From Granfield Gardens, Ladymead Lane and Bristol Road or a nearby road, a technician can come to you. If you are just outside Churchill, we cover Upper Langford (1 mile south-east), Lower Langford (1 mile east), Blackmoor (1 mile north-east), Stock (1 mile north) and Rowberrow (1 mile south). Further out, we also cover Weston-super-Mare (7 miles west), Portishead (10 miles north), Clevedon (7 miles north), Nailsea (7 miles north), Milton (7 miles west) and Yatton (4 miles north).

Around Churchill

Typical jobs here are in homes near Churchill Church of England Primary School, Churchill Methodist Church and Churchill Academy & Sixth Form, among other places. For rail, the closest station is Yatton station, roughly 4 miles north-west. Well-known places in the area include Banwell Museum (3.2 miles west) and Banwell Castle (2.9 miles west). The countryside around Churchill includes Black Down and Kingswood.

Map of Churchill © OpenStreetMap contributors

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • A bath that moves underfoot, until its support is fixed
  • Water coming from the waste or taps rather than the bath
  • Acrylic cracks with no access behind them

If in doubt, send photos and we’ll say what we think before booking.

Materials we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

What we do, step by step

We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. The work itself takes a morning or an afternoon, and we leave the room as we found it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can usually use the bath the day after.

Getting ready for the visit

  • Keep children and pets away from the room on the day
  • Open a window if you can
  • Move bottles, mats and clutter away from the area

How to get a price

For a price in Churchill, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Advice

Should you replace it?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Colour-matched on site
  • A fixed quote before you book
  • Most jobs done in one visit
  • No extra charge for your area

Take a look at our full price list or resurfacing vs replacement cost guide.

Looking after it afterwards

To keep it looking its best:

  • Don’t leave a fresh chip for long
  • Clean with warm water and a mild detergent
  • A dripping tap stains enamel, so fix it early
  • Protect the bath with a towel when doing jobs nearby

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.