Worcestershire · England
Bath chip & crack repair in Stockton on Teme, Worcestershire
Bath repair across Stockton on Teme and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- A failed DIY repair that’s discoloured or lifting
How we handle bath repair in Stockton on Teme
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. We regularly repair pressed steel enamel, acrylic and whirlpool & spa baths, and the jobs we see most are snagging damage from a refit and rust by the waste and overflow.
All our work is covered by our one-year guarantee, wherever you are in Worcestershire.
- Where
- Stockton on Teme (WR6)
- County
- Worcestershire
- Warranty
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
How to get a price
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
Signs you need bath repair in Stockton on Teme
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
The things clients usually mention when they call are:
- Chips along the edge of the bath
- A cracked acrylic bath
- Damage beneath the taps
- Chips caused by builders
Comparing quotes
- A fixed quote, and whether VAT is included
- How changes to the job are handled
- How the colour is matched
- Who will actually do the work
Nearby places to Stockton on Teme
Also in Stockton on Teme
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Wear across the whole surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Common questions in Stockton on Teme
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
How long does the repair take to cure?
Most baths can be used the next day. We confirm the time before we leave.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What bath repair costs
Prices start from £95. Each job gets its own fixed price. This is what makes a difference:
- Access to the area
- The material and finish
- Doing more than one item at once
- How hard the colour is to match
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- What it’s made of, if you know
- One picture of the whole bath
- One sharp close-up of the damage
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why us?
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- No extra charge for your area
Read our prices page or guide to resurfacing and replacement costs.
Aftercare tips
Simple care helps the repair last. We recommend:
- If an acrylic bath flexes, have its feet adjusted
- Get any new chip repaired before it rusts
- Keep metal cans and razors off the surface
- Don’t scrub with anything abrasive
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Where we work around Stockton on Teme
Stockton on Teme is about 6 miles south-west of Stourport-on-Severn, in Worcestershire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Stockton on Teme is one of 376 places in Worcestershire where we work. We work right across the region, from Stockton on Teme to Birmingham (25 miles away).
Every address in WR6 is within our area, from the main roads to the quietest streets. From Pensax Road and Stockton Road or anywhere nearby, a technician can come to you. If you’re just outside Stockton on Teme, we cover Elms Green (1 mile south-east), Pensax (1 mile north), Menithwood (1 mile north-west), Eardiston (2 miles west) and Clows Top (3 miles north). Within a short drive, we also cover Worcester (11 miles south-east), Kidderminster (9 miles north-east), Bromsgrove (15 miles east), Great Malvern (13 miles south), Droitwich Spa (11 miles east) and Stourport-on-Severn (6 miles north-east).
What’s near Stockton on Teme
Typical jobs here are in homes near Church of St Andrew and The Elms Hotel and the streets around them. A little further out are Eastham Bridge mound (3.8 miles west). Open spaces near Stockton on Teme include Abberley Hill and Hunthouse Wood.
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
