Worcestershire · England
Bath chip & crack repair in Elms Green, Worcestershire
Fixed-price bath repair in Elms Green and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
Elms Green: your questions answered
How long does the repair take to cure?
Typically within a day, though it depends on what we have done.
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What happens once I’ve sent photos?
We review the photos and send a fixed quote with dates.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Bath repair in Elms Green without replacing anything
You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Common call-outs are for chips along the edge of the bath and a hole punched through by something heavy, across acrylic, whirlpool & spa baths and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Elms Green (WR6)
- Area hub
- Worcestershire
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How much damage there is
- Unusual colours or finishes
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
You can take the pictures on your phone. Just ensure we can see:
- Where you are, by postcode
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Elms Green and nearby
Elms Green is about 6 miles south-west of Stourport-on-Severn, in Worcestershire. Clients in Elms Green get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We cover 376 places in Worcestershire, from the larger towns to small villages. Our jobs stretch from Elms Green to Birmingham (24 miles away).
Our repair technicians cover all of the WR6 postcode area and the streets around it. Whether you live on Stockton Road and Crundelend Lane or anywhere nearby, a technician can come to you. If you’re just outside Elms Green, we cover Stockton on Teme (1 mile north-west), Pensax (1 mile north), Menithwood (2 miles north-west), Eardiston (2 miles west) and Clows Top (3 miles north). Further out, we also cover Worcester (11 miles south-east), Kidderminster (9 miles north-east), Bromsgrove (15 miles east), Great Malvern (13 miles south), Droitwich Spa (11 miles east) and Stourport-on-Severn (6 miles north-east).
Around Elms Green
We visit homes around The Elms Hotel, Abberley Hall School and Church of St Andrew, among other places. Well-known places in the area include Eastham Bridge mound (4.4 miles west). For a walk, there’s Abberley Hill and Hunthouse Wood.
Towns and villages near Elms Green
Other services in Elms Green
The process
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It typically takes a few hours, and you can get on with other things while we are there.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Let us know about parking or access
- Point us to the nearest place to park
- Open a window if you can
How to get a price
For a price in Elms Green, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
When a repair isn’t the answer
To be straight with you, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Send us photos and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Aftercare tips
Nothing complicated is needed:
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Rinse the bath after use, especially in hard water areas
- Make sure an acrylic bath is firm underfoot
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Repairing versus replacing in Elms Green
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why us?
- Most jobs done in one visit
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
Read our pricing or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
