Norfolk · England

Bath chip & crack repair in Stoke Holy Cross, Norfolk

Damaged bath in Stoke Holy Cross? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Stoke Holy Cross

About our bath repair in Stoke Holy Cross

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include chips along the edge of the bath and cracks in an acrylic bath, in pressed steel enamel, roll-top & freestanding and cast iron enamel.

In a village or hamlet like Stoke Holy Cross, homes are frequently older cottages, farmhouses and barn conversions. Some have heavy cast iron baths or tight bathrooms, and getting a bath out along a lane or up narrow stairs is hard work. Bath repair in place avoids all of that.

A one-year guarantee comes as standard.

Before and after: a damaged acrylic bath corner repaired in place
Area
Stoke Holy Cross (NR14)
County
Norfolk
Warranty
12 months on all our work
Price
From £95. A fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Why repair rather than replace?

People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Older homes around Stoke Holy Cross may have sizes and fittings that new pieces do not match. Repairing avoids those problems.

Prices start from £95. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • Every repair guaranteed for a year
  • Colours mixed by hand to suit your surface
  • Usually one visit, start to finish
  • A fixed quote before you book

See our Full price list Or Guide to resurfacing and replacement costs.

What happens on the day

Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy. For a rural address like Stoke Holy Cross, we plan the journey in advance: tell us about narrow lanes, gates, long drives or where to park. Everything for the bath repair comes with us in one trip.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the following day.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space clear if you can
  • Ensure the room can be ventilated

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed quote

Read more

Common problems we fix in Stoke Holy Cross

Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

You may need us if you’ve spotted:

  • Damage beneath the taps
  • A failed DIY repair that is discoloured or lifting
  • Cracks in an acrylic bath
  • Damage done while the bathroom was being fitted

If you live in one of the older homes near a church such as Church of the Holy Cross, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.

Questions to ask before you book

  • Whether there are any call-out or travel charges
  • How long it needs to cure
  • What happens if they find more damage
  • How to care for the finish

Our hiring checklist

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Common questions in Stoke Holy Cross

Can you fix baths in a rental near Norwich station?

Yes. Send photos and the address, and we’ll quote, and we can arrange access with the tenant if that helps.

Do you cover villages like Stoke Holy Cross?

Yes, villages and hamlets are part of our area.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

What if the damage is worse than the pictures show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Will there be a smell?

Expect a mild smell while we’re working.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Norfolk.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Prices and what affects them

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Access to the area
  • The colour and finish to match
  • How many areas need work
  • What kind of damage it is

Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

How to get a fixed quote

Almost every job we do is priced from pictures. This is what to send:

  • Something in shot to show the size
  • Details of any past repairs
  • A photo taken from further back
  • A clear, close picture of the problem area

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes cost nothing and no obligation.

Keeping it looking good

Once the work has cured, treat it gently:

  • Do not scrub with anything abrasive
  • Put a towel in the bath if you are working above it
  • Store metal items away from the bath
  • Check that an acrylic bath doesn’t move when you stand in it

Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Take it off before we arrive.

What we can’t put right

In fairness, there are a few things a repair will not fix:

  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we cannot reach from underneath
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send pictures and we’ll give you a straight answer.

Materials we repair

  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding

Stoke Holy Cross homes and their baths

If you let a flat or house near Norwich station (about 4.1 miles north), we repair baths between tenancies so it’s ready to let again quickly.

Stoke Holy Cross is about 5 miles south of Norwich, in Norfolk. Whether you’re in the middle of Stoke Holy Cross or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover all 797 towns and villages in Norfolk.

Jobs in NR14 are booked in the same way as anywhere else. Whether your bath is in a home on Barnard Close, Morris Close and Gravel Hill or anywhere close by, a technician can come to you. Nearby, we also carry out bath repair in Dunston (1 mile north-west), Swainsthorpe (1 mile west), Caistor St Edmund (1 mile north), Swardeston (2 miles west) and Keswick (2 miles north-west). Larger places within reach include Norwich (5 miles north), Wymondham (8 miles west), Sprowston (6 miles north), Thorpe St Andrew (5 miles north), Attleborough (13 miles west) and Norwich Lanes (4 miles north).

Around Stoke Holy Cross

Around Stoke Holy Cross, we work in homes near Framingham Earl High School and Dunston Common, among other places. Stoke Holy Cross’s nearest station is Norwich station, about 4.1 miles north. Further afield, we also cover the area around Norfolk and Norwich Hospital (3.9 miles north). Open spaces near Stoke Holy Cross include Hethel Old Thorn.

Map of Stoke Holy Cross © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.