North Somerset · England
Bath chip & crack repair in Stone-edge Batch, North Somerset
Bath repair in and around Stone-edge Batch: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A cracked acrylic bath
Bath repair in Stone-edge Batch without replacing anything
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s scratches you can feel with a fingernail and chips along the edge of the bath, we can normally put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee.
- Area
- Stone-edge Batch (BS21)
- County
- North Somerset
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath repair in Stone-edge Batch?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
Look out for these signs:
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Rusty patches near the plughole
What your quote should include
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- Aftercare advice
- When it can be used again
Places near Stone-edge Batch
Also in Stone-edge Batch
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath doesn’t move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Our work in Stone-edge Batch
Stone-edge Batch is about 1 mile north of Nailsea, in North Somerset. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Stone-edge Batch is one of 86 places in North Somerset where we work. Our nearest city page is Birmingham, about 80 miles away.
Here we cover the BS21 postcode area. Local streets include Summerhouse, The Ripple and Tickenham Hill, all of which we cover. Neighbouring places we cover include West Hill (1 mile east), Tickenham (1 mile west), Nailsea (1 mile south), Clapton in Gordano (1 mile north) and Wraxall (2 miles east). Within a short drive, we also cover Weston-super-Mare (10 miles south-west), Portishead (3 miles north), Clevedon (4 miles west), Milton (10 miles south-west), Yatton (5 miles south-west) and Worle (9 miles south-west).
What’s near Stone-edge Batch
We visit homes around Christ Church, Nailsea School and The Star Inn. Stone-edge Batch’s nearest station is Nailsea & Backwell station, roughly 1.8 miles south of the centre. Further afield, we also cover the area around North Somerset Community Hospital (3.6 miles west) and Oakham Treasures (2.6 miles north-east). Not far away are Clapton Moor and Tickenham Hill.
What affects the price in Stone-edge Batch
Prices start from £95. We do not charge extra for travel to Stone-edge Batch. The price comes down to:
- The material
- How many areas need work
- The type of damage
- The colour and finish to match
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- One sharp close-up of the damage
- One picture of the entire bath
- Whether it’s been repaired or coated before
- What it’s made of, if you know
To get a price, send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Landlords, agents and businesses in Stone-edge Batch
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will handle the rest.
Landlords, letting agents and housing providers in Stone-edge Batch use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Your questions about bath repair in Stone-edge Batch
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across North Somerset.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a morning or an afternoon. Before leaving, we tell you when it can be used and how to care for it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
