Staffordshire · England
Bath chip & crack repair in Cold Norton, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Cold Norton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last
When a repair isn’t the answer
Before you book, it’s worth knowing the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
How we handle bath repair in Cold Norton
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for a kit repair that didn’t last and a hole punched through by something heavy, on pressed steel enamel, whirlpool & spa baths and acrylic.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Cold Norton (ST15)
- Area hub
- Staffordshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
What affects the price in Cold Norton
Prices start from £95. Prices are worked out job by job. The main factors are:
- Previous DIY repairs that have to come out
- The type of damage
- The colour and finish to match
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed quote
Good photos mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Any details about the material
- One sharp close-up of the damage
- The postcode, so we can plan the visit
Send us a picture of the damage and one of the whole item, and tell us you’re in Cold Norton, and we will reply with a fixed price.
Towns and villages near Cold Norton
Other services in Cold Norton
Cold Norton questions
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you work in Cold Norton?
Yes. We work across the UK and come to Cold Norton and the rest of Staffordshire. Send pictures and we’ll quote, or call 0345 017 0787.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What do you need from me?
Use the quote form or ring 0345 017 0787.
About Cold Norton
Cold Norton is about 2 miles south-west of Stone, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Cold Norton is one of 512 towns and villages in Staffordshire where we work. We work right across the region, from Cold Norton to Birmingham (31 miles away).
Our technicians cover all of ST15 and the streets around it. If you’re just outside Cold Norton, we cover Yarnfield (1 mile north-west), Norton Bridge (1 mile south), Stone (2 miles north-east), Shallowford (2 miles south) and Aston-by-Stone (2 miles east). We also work in nearby towns such as Stafford (6 miles south-east), Newcastle-under-Lyme (9 miles north), Cannock (15 miles south-east), Longton (7 miles north), Rugeley (14 miles south-east) and Hednesford (14 miles south-east).
Around Cold Norton
In Cold Norton, that means homes near Alleyne's Academy and Springfields First School and the streets around them. For rail, the closest station is Stone station, roughly 1.9 miles north-east of the centre. Further afield, we also cover the area around St George's Hospital (5.9 miles south-east) and Eccleshall Castle (3.5 miles south-west). Open spaces near Cold Norton include Cop Mere.
Do you need bath repair in Cold Norton?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Contact us if you’ve noticed any of these:
- Chips along the edge of the bath
- Impact holes in acrylic
- A kit repair that didn’t last
- A cracked acrylic bath
What your quote should include
- Whether the price is fixed and includes VAT
- How to look after the finish
- What preparation is included
- How long it needs to cure
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Landlords, agents and businesses in Cold Norton
We carry out planned and one-off repairs for housing associations and facilities teams in Staffordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
- Get a dripping tap fixed promptly
- Have new chips seen to early
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
