Vale of Glamorgan · Wales

Bath chip & crack repair in Sully and Lavernock, Vale of Glamorgan

Local bath repair for Sully and Lavernock: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chips under the taps
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Sully and Lavernock?

Bath repair at your home in Sully and Lavernock

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with cracks in an acrylic bath and a failed DIY repair that’s discoloured or lifting, we can help, whatever the material.

We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.

Where
Sully and Lavernock (CF64)
Area hub
Vale of Glamorgan
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Repair or replace in Sully and Lavernock?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.

Why book with us

  • Honest advice, even when it means no job
  • Rooms protected and left tidy
  • Normally one visit, start to finish
  • Free fixed quotes from pictures

Read our full price list or resurfacing vs replacement cost guide.

Looking after it afterwards

Good habits make a big difference to how long a repair lasts:

  • Get any new chip repaired before it rusts
  • Protect the bath with a towel when doing jobs nearby
  • Rinse the bath after use, especially in hard water areas
  • If an acrylic bath flexes, have its feet adjusted

Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

Can I fix it myself?

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

What happens on the day

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. It generally takes a few hours, and you’re welcome to carry on with your day while we work.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the next day.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Let the surface dry out before the visit
  • Let us know if it has been repaired before

Get a quote

Most customers in Sully and Lavernock get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a fixed quote

Advice

When we would advise against a repair

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we can’t get to from below
  • Metal that has corroded all the way through

Not sure? Send photos and we’ll give you a straight answer before you book.

Materials we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic

Common questions in Sully and Lavernock

What information do you need?

Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.

Can I get a quote without a visit?

Usually, yes. Clear pictures let us give you a fixed price without visiting.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Sully and Lavernock.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Do you cover Sully and Lavernock?

Yes. We work across the UK and come to Sully and Lavernock. Send us pictures for a fixed quote, or call 0345 017 0787.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Signs you need bath repair in Sully and Lavernock

Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Send us a picture if you notice any of these:

  • Damage beneath the taps
  • Impact holes in acrylic
  • Hairline or through cracks in acrylic
  • Scuffs and scratches in the surface

What your quote should include

  • What protection goes down before work starts
  • How soon you can use it again
  • Whether the price is fixed and includes VAT
  • How changes to the job are handled

Choosing a repair company

About Sully and Lavernock

Sully and Lavernock is about 2 miles south-west of Penarth, in the Vale of Glamorgan. We visit homes and businesses in Sully and Lavernock and the surrounding area, so there is no workshop to go to. Sully and Lavernock is one of 67 places in the Vale of Glamorgan where we work.

Postcode districts we cover here: CF64. Whether you live on Cog Road, South Road and Ashby Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Cog (1 mile north), Swanbridge (1 mile south), Palmerstown (2 miles west), Dinas Powys (2 miles north) and Westra (2 miles north-west). Further out, we also cover Barry (3 miles west), Gibbonsdown (3 miles west), Llantwit Major (12 miles west), Cowbridge (11 miles west), Merthyr Dyfan (3 miles west) and Cwm Talwg (4 miles west).

Near you in Sully and Lavernock

In Sully and Lavernock, that means homes near Sully Primary School, The Captain's Wife pub and Church of St John the Baptist, among other places. For rail, the closest station is Dinas Powys station, roughly 1.8 miles north. Nearby you’ll also find Sully Castle (0.8 miles west) and University Hospital Llandough (2.9 miles north). The countryside around Sully and Lavernock includes T. G. Tibbetts and Swanbridge Hill.

Map of Sully and Lavernock © OpenStreetMap contributors

Prices and what affects them

Repairs from £95. Every quote is fixed and free. What we look at:

  • The material and finish
  • Whether old repairs or coatings need taking off
  • Access to the area
  • What kind of damage it is

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.

Getting a price from photos

Phone photos are fine, there is no need for anything special. Ensure they show:

  • The postcode, so we can plan the visit
  • A wider photo showing the entire bath
  • Something in shot to show the size
  • The material, if you know it

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Repairs by material

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.