East Riding of Yorkshire · England
Bath Repair in Swanland
Our repair technicians come to Swanland for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- A cracked acrylic bath
- Chips caused by builders
Bath repair at your home in Swanland
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and people most often call us about hairline or through cracks in acrylic and rust spots around the plughole.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Swanland (HU14)
- Region
- East Riding of Yorkshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. You will not pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- Access to the area
- The type of damage
- How much damage there is
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- Any details about the material
- The postcode, so we can plan the visit
- A photo taken from further back
- A coin beside the damage so we can judge size
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Our work in Swanland
Swanland is about 6 miles west of Kingston upon Hull, in East Riding of Yorkshire. From the centre of Swanland to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Swanland is one of 299 towns and villages in East Riding of Yorkshire we cover. Our jobs stretch from Swanland to Leeds (about 43 miles away).
All of HU14 is within our area, from the main roads to the quietest streets. Whether you live on Main Street, Mere Way and West End or anywhere nearby, a technician can come to you. Neighbouring places we cover include West Ella (1 mile north-east), Kirk Ella (2 miles north-east), Hessle (2 miles south-east), Anlaby (2 miles east) and Willerby (3 miles north-east). Further out, we also cover Beverley (8 miles north), Cottingham (4 miles north-east), Market Weighton (11 miles north-west), Brough (3 miles west), Hedon (12 miles east) and Howden (15 miles west).
Around Swanland
Typical jobs here are in homes near Swanland Primary School, The Swan & Cygnet pub and Hull Collegiate School and the streets around them. For rail, the closest station is Ferriby station, about 1.6 miles south-west of the centre. Well-known places in the area include Skidby Windmill And Museum of East Riding Life (3.8 miles north-east) and Baynard Castle (4.2 miles north-east). Green spaces nearby include Far Ings National Nature Reserve.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
- Get a dripping tap fixed promptly
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
How it works
You do not need to empty the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
How to get a price
Most customers in Swanland get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Nearby places to Swanland
Other services in Swanland
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Swanland customers choose us
- We will tell you if it’s not worth repairing
- Everything repaired in place
- A fixed quote before you book
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
What we’re called out for in Swanland
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Common reasons people in Swanland contact us include:
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
- Rust by the waste and overflow
Questions to ask before booking
- What prep work is covered
- If travel is included in the price
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
Questions from Swanland
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How much does bath repair cost in Swanland?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
For landlords and businesses
Landlords, letting agents and housing providers in Swanland use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
