Lincolnshire · England
Bath chip & crack repair in Swinhope, Lincolnshire
We travel to Swinhope for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
Bath repair in Swinhope, done in place
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our repair technicians work on acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about chips along the edge of the bath and holes from dropped items.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Swinhope (LN8)
- Region
- Lincolnshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
- We will tell you if it’s not worth repairing
- Everything repaired in place
Read our full price list and bath cost comparison.
Questions from Swinhope
Are there extra charges for Swinhope?
No. Our quotes include travel, with the same prices everywhere we work.
How do I get a price for bath repair in Swinhope?
Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
When can I have a bath again?
Normally by the following day, depending on the repair.
Is a cracked acrylic bath repairable?
Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Swinhope and the surrounding area
Swinhope is about 9 miles south of Grimsby, in Lincolnshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Swinhope is one of 732 places in Lincolnshire where we work. Our jobs stretch from Swinhope to Leeds (about 62 miles away).
Our technicians cover all of LN8. We also cover the places around Swinhope: Brookenby (1 mile west), Binbrook (1 mile south), East Ravendale (3 miles north-east), Ashby Hill (3 miles north-east) and Ashby cum Fenby (4 miles north-east). Larger places within reach include Louth (9 miles south-east), New Waltham (7 miles north-east), Humberston (9 miles north-east), Market Rasen (8 miles south-west), Caistor (7 miles north-west) and Holton le Clay (6 miles north-east).
Local landmarks in Swinhope
We visit homes around Church of St Helen and Click 'em Inn, among other places.
When a repair isn’t the answer
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Do you need bath repair in Swinhope?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.
Common reasons people in Swinhope contact us include:
- Damage done while the bathroom was being fitted
- Damage beneath the taps
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
What your quote should include
- Whether there are any call-out or travel charges
- What aftercare is recommended
- How your room will be protected
- A fixed quote, and whether VAT is included
Keeping it looking good
Most damage we see is avoidable. A few tips:
- If an acrylic bath flexes, have its feet adjusted
- Have new chips seen to early
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
What we do, step by step
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Make sure the area is dry
- Let us know which floor the room is on
- Have a window or extractor fan available
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Landlord and trade work in Swinhope
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
If you manage property in Swinhope, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Places near Swinhope
Also in Swinhope
About our accreditations · Every repair comes with a one-year guarantee.
