Wiltshire · England
Bath Repair for The Middles homes
Bath repair for The Middles, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Impact holes in acrylic
- Cracks in an acrylic bath
About our bath repair in The Middles
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. You won’t need a plumber or tiler, because the bath doesn’t move. Typical jobs include impact holes in acrylic and damage done while the bathroom was being fitted, in cast iron enamel, acrylic and roll-top & freestanding.
Every repair is covered by our one-year guarantee.
- Where
- The Middles (BA12)
- Region
- Wiltshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
It helps to know what we can’t do too:
- Leaking fittings, which need a plumber
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Also near The Middles
Other services in The Middles
Keeping it looking good
Looking after the surface is easy:
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse the bath after use, especially in hard water areas
- Have new chips seen to early
- Cover the bath during DIY or decorating
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
The Middles: your questions answered
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairing versus replacing in The Middles
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
Why book with us
- No need to remove anything
- Normally one visit, start to finish
- Work done at your home or business
- No extra charge for your area
Take a look at our prices page or bath cost comparison.
Our work in The Middles
The Middles is about 8 miles south of Warminster, in Wiltshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. The Middles is one of 425 towns and villages in Wiltshire we cover.
We cover every part of BA12. Neighbouring places we cover include West Knoyle (1 mile east), Barrow Street (1 mile south), Limpers Hill (1 mile west), Mere (2 miles west) and North End (3 miles south). Within a short drive, we also cover Westbury (12 miles north), Warminster (8 miles north), Tisbury (6 miles east), Boreham (8 miles north), North Bradley (14 miles north) and Bratton (13 miles north).
Local landmarks in The Middles
We visit homes around Church of St Mary the Virgin and the streets around them. The nearest railway station is Gillingham (Dorset) station, about 4.3 miles south-west. A little further out are Castle Hill (2 miles west) and Mere Museum (1.9 miles west). Open spaces near The Middles include White Sheet Hill.
Prices and what affects them
Repairs from £95. We don’t charge extra for travel to The Middles. The price comes down to:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- A clear, close picture of the problem area
- Details of any past repairs
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Landlords, agents and businesses in The Middles
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
