Wiltshire · England
Bath chip & crack repair in Bratton, Wiltshire
Local bath repair for Bratton: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Snagging damage from a refit
About our bath repair in Bratton
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We regularly repair cast iron enamel, pressed steel enamel and whirlpool & spa baths, and common reasons people get in touch are hairline or through cracks in acrylic and a failed DIY repair that’s discoloured or lifting.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Bratton (BA13)
- Region
- Wiltshire
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. You will know the full cost before you book. We look at:
- The colour and finish to match
- The size and number of damaged areas
- Access to the area
- What kind of damage it is
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- The material, if you know it
- One picture of the entire bath
Upload a picture of the damage and a wider shot of the entire item, with your BA13 postcode, and we’ll reply with a fixed quote.
What we cannot put right
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we will tell you honestly.
Materials we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Bratton questions
How do I get a price for bath repair in Bratton?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a crack in an acrylic bath?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
What do you need from me?
Use the quote form or ring 0345 017 0787.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
More services for Bratton
Repair or replace in Bratton?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.
What you get with us
- No need to remove anything
- Fixed prices from your photos
- Dust sheets down, tidy finish
- Every repair guaranteed for a year
Take a look at our full price list and guide to resurfacing and replacement costs.
Landlord and trade work in Bratton
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Our work in Bratton
Bratton is about 3 miles east of Westbury, in Wiltshire. Anywhere in BA13, we come to you. We cover 425 places in Wiltshire, from the larger towns to small villages.
Our visits in BA13 work the same way as everywhere else we cover. Streets in the area include Church Road, Ethendun and Westbury Road. Nearby, we also work in Edington (1 mile north-east), Dunge (2 miles north-west), Heywood (3 miles west), Westbury (3 miles west) and Yarnbrook (3 miles north-west). Larger places within reach include Trowbridge (5 miles north-west), Chippenham (13 miles north), Calne (13 miles north-east), Devizes (8 miles north-east), Melksham (7 miles north) and Warminster (5 miles south-west).
What’s near Bratton
Our clients here include homes close to Church of St James and Bratton Primary School, among other places. For rail, the closest station is Westbury station, roughly 3.3 miles west of the centre. A little further out are St Georges Hospital (5.1 miles north).
How to care for the repair
To keep it looking its best for years:
- Put a towel in the bath if you’re working above it
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
- Stick to mild cleaners and a soft cloth
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take two to three hours for most chips, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Advice
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
