North Yorkshire · England
Bath Repair in Thornton Watlass
Chip and crack repairs to enamel, acrylic and cast iron baths in Thornton Watlass, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- Chips on the rim or sides
Bath repair in Thornton Watlass, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can generally use the bath the following day. Typical jobs include scratches you can feel with a fingernail and a kit repair that didn’t last, in roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
Whatever the size of the job, you get the same one-year guarantee in Thornton Watlass and across North Yorkshire.
- Location
- Thornton Watlass (HG4)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Thornton Watlass?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Thornton Watlass clients choose us
- Fixed prices from your pictures
- Colours mixed by hand to suit your surface
- Normally one visit, start to finish
- Every repair guaranteed for a year
Take a look at our full price list or guide to resurfacing and replacement costs.
Questions from Thornton Watlass
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your pictures and we’ll quote them together.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you come to Thornton Watlass?
Yes, we do. We send a technician to Thornton Watlass for every job, and the price is the same as everywhere else.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so let us know about it.
Where we work around Thornton Watlass
Thornton Watlass is about 8 miles south of Catterick Garrison, in North Yorkshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in 626 places across North Yorkshire. You can also see our page for Leeds, about 32 miles away.
We cover every part of the HG4 postcode area and the streets around it. If you’re just outside Thornton Watlass, we cover Burrill (1 mile north), Cowling (1 mile north), Snape (2 miles east), Bedale (2 miles north-east) and Well (3 miles south-east). We also work in nearby towns such as Ripon (10 miles south-east), Catterick Garrison (8 miles north), Northallerton (10 miles north-east), Richmond (11 miles north), Thirsk (12 miles east) and Colburn (8 miles north).
Landmarks near Thornton Watlass
Typical jobs here are in homes near Thornton Watlass Church of England Primary School, Church of St Mary and Bedale High School, among other places. Further afield, we also cover the area around Bedale Museum (2.5 miles north-east) and Clifton Castle (1.3 miles south-west).
Nearby places to Thornton Watlass
What else we do in Thornton Watlass
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the day after.
Getting ready for the visit
- Ensure the area is dry
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
Getting a price
Upload photos of the damage and a wider shot of the entire item, with your HG4 postcode, and we’ll reply with a fixed price.
Read more
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The material
- Access to the area
- Unusual colours or finishes
- Whether we combine several jobs
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- The material, if you know it
- Natural light rather than flash
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Aftercare tips
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
- Fix dripping taps early to stop staining and limescale
- Do not scrub with anything abrasive
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Work for landlords and builders
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams in North Yorkshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
