East Riding of Yorkshire · England
Bath chip & crack repair in Thorpe, East Riding of Yorkshire
Problem with your bath in Thorpe? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
Bath repair in Thorpe, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the next day. We’re frequently asked to fix chips along the edge of the bath and damage done while the bathroom was being fitted, in roll-top & freestanding, acrylic and whirlpool & spa baths.
Big or small, you get the same one-year guarantee in Thorpe and across East Riding of Yorkshire.
- Location
- Thorpe (YO25)
- Region
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
FAQs for Thorpe
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
What happens once I’ve sent pictures?
You will get a fixed quote back, plus dates. You are under no obligation.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How do I get a price for bath repair in Thorpe?
Repairs from £95. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Common problems we fix in Thorpe
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Rust spots around the plughole
- A failed DIY repair that’s discoloured or lifting
- Chips caused by builders
- A cracked acrylic bath
Comparing quotes
- Whether they match the colour on site
- Whether a trained technician does the job
- If travel is included in the price
- What happens if they find more damage
What affects the price in Thorpe
Repairs from £95. A fixed quote means you know the cost before booking. We look at:
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- Where the damage is and how we get to it
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- The material, if you know it
- A close-up of the damage, in focus
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
- Work done at your home or business
- We leave the room as we found it
See our full price list or bath cost comparison.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
What happens on the day
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and we leave the room as we found it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
How to get a price
If you’re in Thorpe and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Nearby places to Thorpe
Other services in Thorpe
Elsewhere in East Riding of Yorkshire
Bath Repair in all 299 places in East Riding of Yorkshire
All services in East Riding of Yorkshire
All UK areas
All about bath chip & crack repair
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Put a towel in the bath if you’re working above it
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave a fresh chip for long
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Thorpe and the surrounding area
Thorpe is about 5 miles north-west of Beverley, in East Riding of Yorkshire. Across the YO25 area, we carry out the work at your property. We work in 299 places across East Riding of Yorkshire. You can also see our page for Leeds, about 44 miles away.
Here we cover the YO25 postcode area. We regularly work on streets such as Church Lane and Thorpe. Other places close to Thorpe include Lockington (1 mile north), Beswick (1 mile north-east), Kilnwick (2 miles north), Watton (3 miles north-east) and Aike (3 miles east). We also work in nearby towns such as Beverley (5 miles south-east), Driffield (7 miles north), Pocklington (12 miles west), Hessle (13 miles south), Cottingham (9 miles south) and Hornsea (13 miles east).
Near you in Thorpe
We visit homes around Church of St Mary, among other places. Thorpe’s nearest station is Arram station, roughly 3 miles south-east. A little further out are East Riding Community Hospital (4.9 miles south-east) and Southburn Archaeological Museum (2.5 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
