Lincolnshire · England

Bath chip & crack repair in Thorpe, Lincolnshire

Fixed-price bath repair in Thorpe and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • A chipped rim or side
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Thorpe

How the visit works

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a few hours, depending on the damage, and we will tell you if anything changes.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Make sure the room can be ventilated
  • Keep children and pets away from the room on the day

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.

Get a fixed quote

Related advice

About our bath repair in Thorpe

A typical bath repair is a few hours’ work, and you can normally bathe again the following day. You won’t need a plumber or tiler, because the bath does not move. Our technicians work on acrylic, pressed steel enamel and cast iron enamel, and common reasons people contact us are chips on the rim or sides and chips under the taps.

Your repair is guaranteed for a year, as with every job we do.

Area
Thorpe (LN12)
Region
Lincolnshire
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Thorpe: your questions answered

What do you need from me?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Do you come to Thorpe?

We do. We send a technician to Thorpe for every job, with no extra charge for travel.

Are there extra charges for Thorpe?

There’s no separate call-out charge. The fixed price covers the visit and the work.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Can you quote from photos?

Typically, yes. Clear photos let us give you a fixed price without visiting.

Is a holed acrylic bath repairable?

In most cases. Photos of the hole and the underside help us check.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Have new chips seen to early
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • If an acrylic bath flexes, have its feet adjusted
  • Don’t leave razors or cans standing in the bath

Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

Thorpe and the surrounding area

Thorpe is about 11 miles east of Louth, in Lincolnshire. Our technicians come to homes and businesses in Thorpe, so nothing has to leave your home. We cover 732 places across Lincolnshire, from the larger towns to small villages.

Jobs in LN12 are booked in the same way as anywhere else. Local streets include Main Street and Mile Lane, and we cover them all. We also cover the places around Thorpe: Trusthorpe (1 mile north-east), Sutton on Sea (1 mile south-east), Mablethorpe (2 miles north), Sandilands (2 miles south-east) and Maltby le Marsh (2 miles west). Within a short drive, we also cover Louth (11 miles west), Skegness (12 miles south), Spilsby (12 miles south-west), Alford (5 miles south-west), Chapel St Leonards (7 miles south-east) and Burgh le Marsh (11 miles south).

Landmarks near Thorpe

Around Thorpe, we work in homes near Church of St Peter. A little further out are Alford and District War Memorial Cottage Hospital (5.3 miles south-west).

Map of Thorpe © OpenStreetMap contributors

Honest limits

A repair isn’t always the answer, and we would rather say so up front. Repairs won’t solve:

  • Cracks in acrylic we can’t reach from underneath
  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet

Not sure? Send photos and we will give you a straight answer before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel

Should you replace it?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Prices start from £95. Our prices are the same across the UK, with no extra for Thorpe. The job itself decides the price: how much damage, what it’s made of and how many items.

Why Thorpe customers choose us

  • Colour-matched on site
  • CHAS, Constructionline and SafeContractor accredited
  • No extra charge for your area
  • We come to you, anywhere in the UK

Read our prices page and bath cost comparison.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Signs you need bath repair in Thorpe

Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.

Customers normally contact us about:

  • A kit repair that didn’t last
  • Deep scratches in acrylic
  • Hairline or through cracks in acrylic
  • A chipped rim or side

Before you book anyone

  • Whether they match the colour on site
  • A fixed quote, and whether VAT is included
  • If travel is included in the price
  • Who turns up on the day

10 questions to ask before booking

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.