North Yorkshire · England

Bath Repair in Throxenby

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Throxenby. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Throxenby

Bath repair in Throxenby without replacing anything

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. If you’re dealing with chips under the taps and a cracked acrylic bath, we can normally put it right, on whirlpool & spa baths, acrylic and pressed steel enamel alike.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Throxenby (YO12)
County
North Yorkshire
Warranty
One year on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Honest limits

Some jobs aren’t right for a repair, including:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in acrylic we cannot reach from underneath
  • Water coming from the waste or taps rather than the bath

If in doubt, send pictures and we will say what we think before booking.

Surfaces we repair

  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Roll-top & freestanding

What happens on the day

Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the day after.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Let us know if it has been repaired before

Ask for a price

For a price in Throxenby, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send pictures for a quote

Advice

Common problems we fix in Throxenby

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Typical reasons for a call-out include:

  • A cracked acrylic bath
  • Chips caused by builders
  • Deep scratches in acrylic
  • Holes from dropped items

What to look for in a quote

  • What prep work is covered
  • Who will actually do the work
  • Is the price fixed, and does it include VAT?
  • How long the guarantee is and what it covers

Our hiring checklist

Prices and what affects them

Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:

  • How much damage there is
  • How easy the damage is to reach
  • The type of damage
  • Whether we combine several jobs

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what to send:

  • Where you are, by postcode
  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

About Throxenby

Throxenby is about 1 mile north-west of Falsgrave, in North Yorkshire. Anywhere in YO12, a technician comes to you. Throxenby is one of 626 places in North Yorkshire where we work. You can also see our page for Leeds, about 56 miles away.

All of YO12 is covered. Whether you live on Moor Lane, Scalby Road and Rowbrow Road or a nearby road, a technician can come to you. Being close to the A171, Throxenby is simple for us to get to. We also cover the places around Throxenby: Newby (1 mile north), Northstead (1 mile east), Falsgrave (1 mile south-east), Scarborough (1 mile east) and East Ayton (2 miles south-west). Larger places within reach include Filey (8 miles south-east), Pickering (14 miles west), Hunmanby (9 miles south-east), Eastfield (4 miles south-east), Cayton (4 miles south-east) and Osgodby (4 miles south-east).

What’s near Throxenby

Typical jobs here are in homes near Graham School, Raincliffe School and Peasholm Park, among other places. You’ll also find Barrowcliff School (0.5 miles east) and St Luke (0.5 miles south-east). The closest station to Throxenby is Scarborough station, roughly 1.5 miles east of the centre. Well-known places in the area include Scarborough Hospital (under half a mile south-east) and Brunswick Shopping Centre (1.6 miles east). The countryside around Throxenby includes Oliver's Mount and Forge Valley.

Map of Throxenby © OpenStreetMap contributors

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

Throxenby questions

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help, and it soon fades.

Can you redo an old repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Is a bath repair permanent?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.

Do you cover Throxenby?

We do. Technicians travel to Throxenby from across the region, with no extra charge for travel.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is there a guarantee?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Repair or replace in Throxenby?

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • Most jobs done in one visit
  • We leave the room as we found it
  • A fixed quote before you book
  • Same prices wherever you are

See our full price list or bath cost comparison.

For landlords and businesses

For anyone letting property in or around Throxenby, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.