Essex · England

Bath chip & crack repair in Thundersley, Essex

Bath repair across Thundersley and nearby, normally in one visit and guaranteed for a year.

  • Repairs from £95
  • A chip where the taps sit
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Thundersley

Bath repair at your home in Thundersley

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Common call-outs are for a kit repair that didn’t last and a hole punched through by something heavy, across whirlpool & spa baths, cast iron enamel and roll-top & freestanding.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Location
Thundersley (SS7, SS6)
Region
Essex
Cover
One year on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the following day.

How to prepare

  • Tell us about parking, stairs or access
  • Tell us about any previous repairs or coatings
  • Ensure the area is dry

Getting a price

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send photos for a quote

Related advice

Your questions about bath repair in Thundersley

Will the price change on the day?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Is a holed acrylic bath repairable?

Usually. Photos of the hole and the underside help us check.

Do you do work for letting agents?

Yes, often. We can quote for several properties together and work between tenancies.

What do you need from me?

Photos of the damage, a picture of the entire bath and your postcode. Then we will agree a date.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you cover the entire of Essex?

All of Essex, and the rest of the UK. There is no extra charge for travel.

Can you repair a chip on a coloured bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

About Thundersley

Thundersley is about 3 miles north of Canvey Island, in Essex. We visit customers in Thundersley and the surrounding area, so you don’t need to take anything anywhere. We work in all 644 towns and villages in Essex, from the larger towns to small villages. We work right across the region, from Thundersley to London (about 29 miles away).

We work across SS7 and SS6. From Thundersley Church Road, Church Road and London Road or anywhere nearby, a technician can come to you. We also cover the places around Thundersley: South Benfleet (1 mile south-west), Tarpots (1 mile west), North Benfleet (2 miles west), Bowers Gifford (3 miles west) and Nevendon (3 miles north-west). We also work in nearby towns such as Chelmsford (12 miles north), Basildon (5 miles west), Brentwood (12 miles west), Maldon (12 miles north), Canvey Island (3 miles south) and Billericay (8 miles north-west).

Around Thundersley

Our clients here include homes close to Church of St Peter, Thundersley Primary School and The Deanes School. The nearest railway station is Rayleigh station, roughly 1.7 miles north-east. Further afield, we also cover the area around Rayleigh Castle (1.7 miles north-east) and Chartwell Private Hospital (2.9 miles south-east). Green spaces nearby include Little Haven Nature Reserve.

Map of Thundersley © OpenStreetMap contributors

Signs you need bath repair in Thundersley

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

If you can see any of these, send us a picture:

  • Holes from dropped items
  • Rusty patches near the plughole
  • Damage done while the bathroom was being fitted
  • A failed DIY repair that is discoloured or lifting

Comparing quotes

  • What happens if the damage is worse than the pictures show
  • A fixed quote, and whether VAT is included
  • Who turns up on the day
  • Whether cleaning and preparation are in the price

Choosing a repair company

Should you replace it?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Technicians who travel to you, UK-wide
  • Everything repaired in place
  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year

Take a look at our prices page and bath cost comparison.

Honest limits

Before you book, it’s worth knowing the limits too:

  • Cracks in acrylic we cannot reach from underneath
  • A steel bath rusted through
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we will say what we think before you book.

Materials we repair

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

DIY kit or professional repair?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What bath repair costs

Repairs from £95. Quotes are free and the price is fixed. What we look at:

  • What kind of damage it is
  • Doing more than one item at once
  • Unusual colours or finishes
  • Access to the area

Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Getting a price from pictures

The better the pictures, the more accurate the price. Here’s what helps:

  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • Good light, ideally daylight, without flash glare
  • Something in shot to show the size

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.

For landlords and businesses

For anyone letting property in or around Thundersley, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

How to look after the repair

Most damage we see is avoidable. A few tips:

  • Check that an acrylic bath does not move when you stand in it
  • Rinse the bath after use, especially in hard water areas
  • Clean with warm water and a mild detergent
  • Keep abrasive pads and gritty cleaners away from the bath

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.