Essex · England

Bath and surface repairs in SS7

We travel to every part of the SS7 postcode district, which takes in Thundersley, South Benfleet and Hadleigh. All work is done at your home, with a one-year guarantee.

How bath repair works in SS7

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include rust by the waste and overflow and a hole punched through by something heavy, across acrylic, whirlpool & spa baths and pressed steel enamel.

Arrival times are agreed in advance. On site, it takes a few hours, depending on the damage for most jobs. The room is left tidy.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can typically use the bath the next day.

What you will pay

Prices start from £95. Our prices are the same across the UK, with no extra for SS7. The job itself decides the price: the material, the amount of damage and how many items.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Colour mixed on the day to match
  • We leave the room as we found it
  • One price list for the entire UK

Getting a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

Landmarks near Thundersley

Our customers here include homes close to Church of St Peter, Thundersley Primary School and The Deanes School. For rail, the closest station is Rayleigh station, roughly 1.7 miles north-east. Other landmarks nearby include Rayleigh Castle (1.7 miles north-east) and Chartwell Private Hospital (2.9 miles south-east). Not far away are Little Haven Nature Reserve.

How we price bath repair

Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:

  • How many areas need work
  • The colour and finish to match
  • What kind of damage it is
  • Previous DIY repairs that have to come out

Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from photos

Most quotes are done from photos alone. To help us price it:

  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus

There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Common problems we fix in SS7

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.

The things customers normally mention when they call include:

  • Chips caused by builders
  • Chips along the edge of the bath
  • Chips under the taps
  • Scuffs and scratches in the surface

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Looking after it afterwards

Aftercare is simple:

  • Stick to mild cleaners and a soft cloth
  • Don’t leave razors or cans standing in the bath
  • Protect the bath with a towel when doing jobs nearby
  • Get any new chip repaired before it rusts

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

Materials and what they mean for the repair

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

SS7: your questions answered

Can you repair a hole in a bath?

In most cases. Photos of the hole and the underside help us check.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

How do I get a price for bath repair in SS7?

Prices start from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your SS7 postcode.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Mention it when you send photos.

What areas do you cover?

We cover the entire UK, including SS7 and the rest of Essex. Just include your postcode and we’ll offer you dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.